1,3-Propanediol

1,3-Propanediol is the organic compound with the formula CH2(CH2OH)2. This three-carbon diol is a colorless viscous liquid that is miscible with water.[2]

1,3-Propanediol
Skeletal formula of 1,3-propanediol
Spacefill model of 1,3-propanediol
Names
IUPAC name
Propane-1,3-diol[1]
Other names
1,3-Dihydroxypropane
Trimethylene glycol
Identifiers
3D model (JSmol)
3DMet
Abbreviations PDO
969155
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.007.271
EC Number
  • 207-997-3
KEGG
MeSH 1,3-propanediol
RTECS number
  • TY2010000
UNII
Properties
C3H8O2
Molar mass 76.095 g·mol−1
Appearance Colourless liquid
Density 1.0597 g cm−3
Melting point −27 °C; −17 °F; 246 K
Boiling point 211 to 217 °C; 412 to 422 °F; 484 to 490 K
Miscible
log P −1.093
Vapor pressure 4.5 Pa
1.440
Thermochemistry
−485.9–−475.7 kJ mol−1
−1848.1–−1837.9 kJ mol−1
Hazards
Safety data sheet sciencelab.com
S-phrases (outdated) S23, S24/25
NFPA 704 (fire diamond)
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
2
0
Flash point 79.444 °C (174.999 °F; 352.594 K)
400 °C (752 °F; 673 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Products

It is mainly used as a building block in the production of polymers such as polytrimethylene terephthalate.[3]

1,3-Propanediol can be formulated into a variety of industrial products including composites, adhesives, laminates, coatings, moldings, aliphatic polyesters, copolyesters. It is also a solvent and used as an antifreeze and in wood paint.

Production

1,3-Propanediol is mainly produced by the hydration of acrolein. An alternative route involves the hydroformylation of ethylene oxide to afford 3-hydroxypropionaldehyde. The aldehyde is subsequently hydrogenated to give 1,3-propanediol. Biotechnological routes are also known.[3]

Two other routes involve bioprocessing by certain micro-organisms:

Safety

1,3-Propanediol does not appear to pose a significant hazard via inhalation of either the vapor or a vapor/aerosol mixture.[8]

See also

References

  1. "1,3-propanediol - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 16 September 2004. Identification and Related Records. Retrieved 20 October 2011.
  2. Merck Index, 11th Edition, 9629.
  3. Carl J. Sullivan; Anja Kuenz; Klaus‐Dieter Vorlop (2018). "Propanediols". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a22_163.pub2.
  4. Peter Werle, Marcus Morawietz, Stefan Lundmark, Kent Sörensen, Esko Karvinen, Juha Lehtonen "Alcohols, Polyhydric" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, 2006, Weinheim.
  5. Carl F. Muska; Carina Alles (2005-05-11). "Biobased 1,3-Propanediol A New Platform Chemical For The 21st Century" (PDF). BREW Symposium.
  6. "Growing Demand for Products Manufactured from DuPont's Bio-Based Propanediol". AZoM.com. 2007-06-12.
  7. H. Biebl; K. Menzel; A.-P. Zeng; W.-D. Deckwer (1999). "Microbial production of 1,3-propanediol". Applied Microbiology and Biotechnology. 52 (3): 289–297. doi:10.1007/s002530051523. PMID 10531640. S2CID 20017229.
  8. Scott RS, Frame SR, Ross PE, Loveless SE, Kennedy GL (2005). "Inhalation toxicity of 1,3-propanediol in the rat". Inhal Toxicol. 17 (9): 487–93. doi:10.1080/08958370590964485. PMID 16020043. S2CID 25647781.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.