Bowlus BZ-1

The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.[1][2]

BZ-1
Role Glider
National origin United States
Designer Michael Bowlus
First flight September 13, 1984
Introduction 1983
Number built One

Design and development

The BZ-1 started as a design by Clark Frazier of Bluffton, Ohio in 1967. He started construction of a glider fuselage from the drop tank of a North American F-86 Sabre and called it the Zeus II. Frazier never completed the project and it was subsequently purchased by Michael Bowlus of Worthington, Ohio. Bowlus constructed wings for the re-designated BZ-1, starting with the wing design of the Schreder Airmate HP-11, but shortened to 15 m (49.2 ft). The wing incorporates ailerons hinged at the bottom and a NACA 65 (3)-618 laminar flow airfoil. The interconnected flaps and ailerons are all undercambered and assembled using the same bonded construction technique used on the Schreder HP-18. The flaps extend to 90° for landing.[1][2]

The BZ-1 has a retractable monowheel landing gear, a V-tail and was built from aluminium. At the time of its completion in 1983 the designer intended to add water ballast tanks to allow the carriage of 115 lb (52.2 kg) of water.[1][2] The BZ-1 had its first flight on September 13, 1984.[3]

The aircraft was reported as complete and ready for first flight in 1983, but in May 2011, it was no longer on the Federal Aviation Administration registry.[2][4]

Specifications (BZ-1)

Data from Sailplane Directory and Soaring[1][2]

General characteristics

  • Crew: one
  • Wingspan: 49 ft 3 in (15 m)
  • Wing area: 102 sq ft (9.5 m2)
  • Aspect ratio: 23.7
  • Airfoil: NACA 65(3)-618
  • Empty weight: 480 lb (218 kg)
  • Gross weight: 700 lb (318 kg)

Performance

  • Maximum glide ratio: 37:1 (projected) at 55 mph (89 km/h)
  • Rate of sink: 120 ft/min (0.61 m/s) (projected) at 50 mph (80 km/h)

See also

References
  1. Activate Media (2006). "HP-11 Airmate HP Aircraft, LLC". Archived from the original on 20 August 2011. Retrieved 4 May 2011.
  2. Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 7. Soaring Society of America November 1983. USPS 499-920
  3. Bowlus, Michael: The Bowlus BZ-1, page 36. Soaring Society of America March 1986.
  4. Federal Aviation Administration (May 2011). "Make / Model Inquiry Results". Retrieved 15 May 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.