Chicago Pile-3

Chicago Pile-3 (CP-3) was the world's first heavy water reactor. It was built in 1943 near Palos Hills, Illinois, on the former and original site of Argonne National Laboratory. It first went critical on 15 May 1944, was used in the experimental physics work of the Metallurgical Laboratory for the Manhattan Project, and was deactivated in 1954.

Chicago Pile-3

CP-3 was initially fueled with natural uranium and used heavy water as a neutron moderator. In January 1950, the reactor was dismantled due to suspicion of corrosion of the aluminum cladding that surrounded the control rods. The reactor was rebuilt and redesignated CP-3′ (CP-3 prime). It was restarted in May 1950 and operated until 1954.[1] The reactor was authorized to operate up to 300 kilowatts.[2] The two versions of the reactor were used to study physics, separate fission products, recover tritium from irradiated lithium, and study radionuclide metabolism in laboratory animals.

After the reactor was decommissioned, the fuel and heavy water were shipped to the Oak Ridge National Laboratory. Pipes, valves, and building debris were placed in the reactor's containment shell, which was then filled with concrete. The 800-short-ton (730 t) shell was buried on the site in a 40-foot (12 m) deep pit.

The site, now known as the Site A/Plot M Disposal Site, sits within Red Gate Woods, part of the Cook County Forest Preserve system. A historical marker commemorates the site of CP-3 and its sister reactor CP-1/CP-2.[1]

See also

References
  1. "Site A/Plot M, Illinois, Decommissioned Reactor Site Fact Sheet" (PDF). United States Department of Energy. 2009-04-05. Retrieved 2009-11-07.
  2. "Nuclear Reactors Built, Being Built, or Planned: 2003" (PDF). United States Department of Energy. December 2003. Archived from the original (PDF) on 2011-07-16. Retrieved 2009-11-07.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.