Earth anchor

An earth anchor is a device designed to support structures, most commonly used in geotechnical and construction applications. Also known as a ground anchor, percussion driven earth anchor or mechanical anchor, it may be impact driven into the ground or run in spirally, depending on its design and intended force-resistance characteristics.

Single helix earth anchors
Guyed mast anchor

Earth anchors are used in both temporary or permanent applications, including supporting retaining walls, guyed masts, and circus tents.

History

The first practical earth anchor was invented in 1912 by Albert Bishop Chance in Centralia, Missouri, in response to an ice storm that knocked down his company’s telephone poles.[1] The town of Centralia holds an annual Anchor Day Festival.[2]

Applications
An earth anchor for guy wires on a guyed mast near Thabazimbi, South Africa

Earth anchors are typically used in civil engineering and construction projects, and have a variety of applications, including:

  • Retaining walls, as part of erosion control systems.[3]
  • Structural support of temporary buildings and structures,[4] such as circus tents and outdoor stages.
  • Tethering marine structures, such as floating docks and pipelines.
  • Supporting guyed masts, such as radio transmission towers.
  • Anchoring utility poles and similar structures.
  • Drainage systems, for loadlocking and restraining capability to happen simultaneously.[5]
  • Landscape, anchoring trees, often semi-mature transplants.[6]
  • General security, as in anchoring small aircraft.
  • Sporting activities, such as slacklining or abseiling.

Types

Deadman

A deadman is one of the simplest ground anchors in terms of equipment needed, and is suitable for light loads or temporary installations. It is a horizontal beam, such as a log or steel girder, placed crosswise to the load and buried in a hole in the ground. It can be constructed with as little as a tree branch, adequate rope and adequate digging.[7]

A deadman may also be placed on the surface, held in place by a number of picket stakes. This allows a greater load to be taken than a single row of pickets.

Performance

Once installed and load-locked, an earth anchor exerts effort to the soil above it, with the soil in turn providing resistance.[8] Upward soil compression created by the anchor is typically exerted in a frustum shaped cone,[9] reflecting:

  • The shear angle of the soil
  • The depth at which the anchor has been installed
  • The load applied to the anchor
  • The size of the anchor and size and angle of its lateral surfaces

When angled these lateral surfaces generate greater cone-shaped soil resistance than a simple cylinder created by purely perpendicular design.[10]

Installation

Site analysis determining soil load resistance is often required before earth anchor installation.[11] Included are depth that the anchor is to be driven, and soil strength, moisture content, and corrosivity.[12] When appropriate, test installations are done to determine optimal anchor design or conformance with project specifications.

Installation methods differ depending on soil composition and moisture.[11] Earth anchors are commonly driven into the ground using a drive rod and impact hammer. Pilot holes are required in denser soils. After an impact driven anchor has been installed, the drive rod is removed and the anchor load-locked, typically by rotating it ninety degrees. For lighter anchors a hand tool is often sufficient.

References
  1. "Ground Anchors – The History".
  2. "Annual Anchor Festival".
  3. Archived 2012-08-21 at the Wayback Machine Core Applications, retrieved 2012-07-09
  4. Geotechnical Engineering Circular No. 4 retrieved 2012-07-09
  5. Archived 2012-08-21 at the Wayback Machine Platipus Anchors, retrieved 2012-07-09
  6. Patent 2765764 Summary
  7. "6: Rigging" (PDF). Steelworker, vol 2. US Navy. p. 6-26. NAVEDTRA No: 14251 – via GlobalSecurity.org.
  8. "Helical Anchors - A complete guide".
  9. "How A Mechanical Anchor Works". Archived from the original on 2012-08-21. Retrieved 2012-07-16.
  10. "Canadian Intellectual Property Office: Patent 2175673 Summary".
  11. "An Earth Anchor System: Installation and Design Guide" (PDF).
  12. "Ground Anchor Practice in New Zealand - A Review of Applications, Design and Execution" (PDF). Archived from the original (PDF) on 2012-07-11. Retrieved 2012-07-16.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.