Isochronous burst transmission

Isochronous burst transmission is a method of transmission. In a data network where the information-bearer channel rate is higher than the input data signaling rate, transmission is performed by interrupting, at controlled intervals, the data stream being transmitted.

Note 1: Burst transmission in isochronous form enables communication between data terminal equipment (DTE) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE output data signaling rate.

Note 2: The binary digits are transferred at the information-bearer channel rate. The data transfer is interrupted at intervals in order to produce the required average data signaling rate.

Note 3: The interruption is always for an integral number of unit intervals.

Note 4: Isochronous burst transmission has particular application where envelopes are being transferred between data circuit terminating equipment (DCE) and only the bytes contained within the envelopes are being transferred between the DCE and the DTE. Synonyms: burst isochronous (deprecated), interrupted isochronous transmission.[1]

References
  1. https://www.its.bldrdoc.gov/fs-1037/fs-1037c.htm

 This article incorporates public domain material from the General Services Administration document: "Federal Standard 1037C". (in support of MIL-STD-188)

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.