London Underground code alert

A London Underground code alert is a warning issued by a London Underground Line Controller (who oversees the running of a line in conjunction with the signal operator) over the radio system giving both train and station staff information about a potential problem. The codes are rarely used as they are specifically reserved for emergency situations.

Codes
Code Response
Amber All trains to proceed to next station or as far as otherwise possible while obeying all signals.[1] The order stops the trains but permits the rapid evacuation of carriages and stations and the rerouting of passengers. A code amber alert was issued in response to both the London bombings on 7 July[2] and 21 July in 2005.[3]
Red Immediate stop order issued to all trains irrespective of their locations.[4] This could result in getting passengers out from trains stopped away from platforms or part-way down tunnels. In these cases, special procedures would be required to evacuate the carriages when considering the presence of electrified rails in the tunnels.
Emergency A specific area has to be evacuated. This code is used to evacuate a section of the line when life and safety is in direct peril.[5] This code allows abnormal movement of trains (for example, trains moving in the wrong direction to reach a station).

See also

References
  1. Rule Book 7 Train incidents and safety equipment p11 - 12 STAFF ISSUED ONLY
  2. "Tube log shows initial confusion". BBC. 12 July 2005. Retrieved 28 May 2014.
  3. Millward, David (22 July 2010). "Code Amber as Tube avoids a complete shutdown". The Daily Telegraph. London: Daily Telegraph. Retrieved 11 October 2010.
  4. Rule Book 7 Train incidents and safety equipment p12 STAFF ISSUED ONLY
  5. Rule Book 7 Train incidents and safety equipment p13 STAFF ISSUED ONLY


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.