M1/M3 (railcar)

The M1 and M3 are two similar series of electric multiple unit rail cars built by the Budd Company for the Long Island Rail Road, the Metro-North Railroad and Metro-North's predecessors, Penn Central and Conrail.[3] Originally branded by Budd as Metropolitans, the cars are more popularly known under their model names, M1 (late 1960s/early 1970s cars) and M3 (mid 1980s cars). The Metro North cars were branded under the M1A and M3A series.

M1/M3
An M3 on the Long Island Rail Road at Cedarhurst in 2008
Interior of an MNRR M3A
In serviceM1: 1968-2007
M1A: 1968-2009
M3: 1985-present
M3A: 1984-present
ManufacturerBudd Company
Built atRed Lion Assembly Plant
Northeast Philadelphia, PA
Family nameBudd Metropolitan
ConstructedM1/M1A: 1968-1973
M3/M3A: 1984-1986
Entered serviceM1: 1968
M1A: 1971
M3: 1985
M3A: 1984
ScrappedM1: 2007
M1A: 2009
M3:
M3A:
Number built1264
  • M1: 770
  • M1A: 178
  • M3: 174
  • M3A:142
Number in serviceM1: (2 in work service)
M3: (4 in work service)[1]
M3A: 142
Number preserved2 (M1 only)
Number scrapped962
  • M1: 764
  • M1A: 178
  • M3: 20
  • M3A: 0
FormationMarried Pair
Fleet numbersM1: 9001-9770
M1A: 8200-8377
M3: 9771-9890, 9893-9946
M3A: 8000-8141
Capacity120 (M3)[2]
Operator(s)Long Island Rail Road
Penn Central
Conrail
Metro-North Railroad
Specifications
Car body constructionStainless Steel, with fiberglass end caps on the operating ends
Train length170 ft (51.82 m) - 1,020 ft (310.90 m)
Car length85 ft (25.91 m)
Width10 ft 6 in (3,200 mm)
Height13 ft (3,962 mm) excluding rooftop horns
Floor height4 ft (1,219 mm)
Platform height4 ft (1,219 mm)
DoorsQuarter point, double leaf automatic
Maximum speed100 mph (160 km/h) design
80 mph (130 km/h) service
Traction systemDC current fed through a camshaft controlled resistance switch to 4 DC traction motors.
Traction motorsM1/M1A: 4x148 horsepower (110 kW) GE 1255 A2
M3/M3A: 4x160 horsepower (120 kW) GE 1261(M3)
Power outputM1/M1A: 592 horsepower (441 kW)
M3/M3A: 640 horsepower (480 kW)
TransmissionElectric
Train heatingelectric heat, air conditioning
Electric system(s)650 V DC - 750 V DC
Third Rail
Current collection methodContact shoe
BogiesM1: Budd Pioneer
M3: General Steel GSI 70
Braking system(s)Pneumatic, dynamic
Safety system(s)Cab signals with Automatic Train Control. emergency brakes
Coupling systemWABCO Model N-2
Headlight typeHalogen light bulbs
Track gauge4 ft 8 12 in (1,435 mm) standard gauge

Overview

A then-recently-retired Metro-North M1A on the unpowered siding at Harmon Shops, April 2006

Even though the LIRR's fleet of some 900 MP54 electric MU cars constructed between 1908 and 1930 had been augmented between 1955-1963 by about 150 newer MP72 and MP75 EMUs, the roster still contained a large number of increasingly elderly prewar cars which the cash strapped LIRR was unable to replace. In 1965 the nearly bankrupt commuter railroad was taken over by the state owned Metropolitan Commuter Transportation Authority, later renamed the Metropolitan Transportation Authority in 1968, which was then able to provide large amounts of capital funding to bring the system to a state of good repair. One of the first items on the list was a massive order of brand new self-propelled electric railcars that could replace the remaining MP54s and provide modern levels of comfort and performance.

The Metropolitans, at the time of their introduction, were notable for their rounded ends and quarter-point sliding doors. The cars were fully air conditioned, accommodated only high level boarding, used light weight construction and were built with a top speed of 100 mph[4] and support for Automatic Train Operation. The Metropolitan cars were also the catalyst of change for their respective systems as the high-level boarding required all stations in the electrified zone to be rebuilt from 1966-1968[5] and the increased power demand forced the LIRR to update its third rail power supply from 650 V DC to 750 V DC to take advantage of the cars' performance. On December 30, 1968 the M1s went into revenue service, with the first revenue train being an 8-car local from Babylon to Penn Station.

With a completely new look and feel both inside and out the Metropolitan cars blurred the line between traditional commuter rail and rapid transit with the later R44 and R46 series of cars for the sister New York City Subway adopting many of the same design elements. Compared to the older cars with their drop sash windows, slow speeds, rough suspension and growling gearboxes the Metropolitans ushered in a new era of commuting in the New York region.

M1/M1A series

M1 cars at Jamaica station in 1969

The M1 series were funded by both New York State and the then-fledgling Metropolitan Transportation Authority which gained operation of the lines partway though the order.[3] The 770 M1s (9001-9770) built for the LIRR between 1968 and 1973 represented the largest single order of electric multiple units in North America up until that time. 620 cars were in the base order from 1968–71, with 150 option cars following in 1973. Additional 178 M1As (8200-8377) were built for the former New York Central commuter operations from 1971 and 1973, allowing the railroad to replace its remaining pre-war MU cars and the 100 4500 series ACMUs (which were in need of a 20-year overhaul). Using Budd Pioneer III trucks and powered by four 148 horsepower (110 kW) GE 1255 A2 traction motors, each car had 592 horsepower. They were designed to achieve 100 mph running in service, achieving only 80 mph in service due to track and signaling limitations. The LIRR cars also featured support for Automatic Train Operation, although this too was never seen in service.

The Cosmopolitans

On the heels of the success of the M1/M1As, the MTA and a joint venture between GE, Budd, Canadian Vickers and Avco produced a series of structurally similar cars for the New Haven Line. Built between 1972 and 1977, the M2s (initially branded by Budd as the Cosmopolitans) fully replaced the ex-New Haven EMU cars for use on the New Haven mainline and the New Canaan Branch. Budd and MTA would later license the design to other manufacturers for updated versions.

GTELs

In the late 1970s, eight "GTEL" (Gas Turbine-ELectric) trains were built; four were built by Garrett AiResearch and four by General Electric. These cars were numbered 4001-4008, and were powered by both a gas turbine engine and third rail collection for a dual mode operation. They were tested by the LIRR to see the feasibility of running such cars on non-electrified branches. They used the M1 bodies, but had low level boarding stairs. After around 1977, the cars were out of service. The Garrett-built cars were ultimately scrapped, while the General Electric-built cars became M1As for Metro-North.

M3/M3A series

A Metro-North M3A train entering Ossining on the Hudson line

With electrification areas of both railroads expanding, the MTA placed an order for another series in 1982, the M3 series. Essentially compatible with, and (on the exterior) very similar to, the M1 series, the M3s had updated mechanical elements such as the use of General Steel GSI 70 trucks and a few other small differences. Traction motor cooling was added to the M3 at the cost of added weight which was compensated for by the use of more powerful 160 horsepower (120 kW) GE 1261 motors. Even with the extra power this created different acceleration and braking rates from the M1. While LIRR chose to mix M1s and M3s in the same consist, Metro-North chose not to and would always run with uniform trainsets. 174 M3s (9771-9944, with 9891 and 9892 renumbered to 9945 and 9946 after the Long Island Rail Road massacre) were produced for the LIRR between 1984 and 1986 with 142 M3As (8000-8141) produced for Metro North, arriving between 1984 and early 1985.

This order would be the second-to-last handled by Budd, which in April 1987 left the railroad business after taking the name "TransitAmerica" under which the last M3s were produced though their builders plates kept the Budd name.

Refurbishment

With the arrival of the M3 series, the M1 and M1A cars each saw midlife rebuilds in the late 1980s in order to prolong their useful life. The overhauled interiors were very similar to those of the M3s. Still, time began to take its toll on the original M1 cars and by the end of the 20th century the time for the cars was running short.

Some Metro-North M3As received minor interior refreshes throughout 2006/2007. The LIRR M3s, however, have remained with their original, old-fashioned interior style of wood and faux leather.

In 1994, all M1s and M1As received headlights mounted on the center top of their front ended fiberglass bonnets to illuminate the top areas. This modification was done following an incident in which a Metro-North engineer operating an M1A train was severely injured and blinded when a cinderblock tied below a fence of an underpass crashed through the windshield of the train.

Retirement

A retired LIRR M1 with other cars at the Railroad Museum of Long Island in Riverhead

M1

In 1999, the MTA awarded Bombardier Transportation the contract to build the replacement for the M1 series, the M7 series. With the arrival of the first M7s to the LIRR in 2002 and the first M7As to Metro North in 2004, both roads began to retire the M1 series. LIRR retired the last M1 cars in January 2007, while a small number of M1As remained in service on Metro-North until March 2009. In preparation of the retirement of the M1s, the Sunrise Trail chapter of the National Railway Historical Society hosted a "Farewell to the M1s" fan trip on November 4, 2006.

The Railroad Museum of Long Island in Riverhead, NY has preserved M1 pair 9547-9548. Pair 9411-9412 survive as training cars at the Nassau County Fire Service Academy in Bethpage. Cars 9401 and 9591 were renumbered to E401 and E591 (respectively) and serve as rail adhesion cars. Pair 9745-9746 was held for preservation by the New York Transit Museum and was stored around the system until May 2018, when it was taken off property for scrapping.[6]

M3

In the 1990s, M3 car 9776 was wrecked in an accident and subsequently scrapped. Its mate, 9775, was converted to a rail adhesion car and renumbered to E775.[7] On January 22, 2013, car 9870 retired when it collided with a car at Brentwood station and then caught fire. It is currently stored out of service.[8][9] Its mate, 9869, was mated with 9772, which lost its mate 9771 due to electrical failures on that car. Car 9932, which lost its mate due to unknown reasons, was also converted to a rail adhesion car and renumbered to E932.[7] In 2018, M3 pair 9901-9902 was converted to a pair of rail adhesion cars. The cars were renumbered to E901-E902. One car in each pair was retrofitted with high-powered lasers from Laser Precision Solutions from the Netherlands to incinerate leaf residue.[10]

Between 2011 and 2013, twenty M3 cars were prematurely taken out of service and stripped of parts to keep the other cars running. They were taken off property to be scrapped in 2018.

As of 2013, the MTA has spent nearly $2 billion to procure a replacement for the M3 series, the M9.[11][12] The fleet is similar to the M7, and the first cars arrived in 2018.[13] As of October 2017, there were 92 M9 cars planned, with options for up to 494 more.[14][15] However, due to delays in the M9 contract, the Long Island Railroad plans to rebuild, and keep at least 80 to 100 M3 cars in service through at least 2024.[16] Metro-North also planned to overhaul their M3A units,[17] but later stated that they "are working with LIRR to procure new M9A cars in the next Capital Program to provide additional capacity and to replace their existing M3s instead of overhauling same."[18]

See also

Notes

  1. https://new.mta.info/document/25251 page 143
  2. "Supplementary Information for §1269(d) 2012 – 2017" (PDF). mta.info. Metropolitan Transportation Authority. 2012. Retrieved July 24, 2016.
  3. Cudahy, p. 264
  4. Middleton, p. 271
  5. Cudahy, p. 212
  6. "Oyster Bay Railroad Museum". www.facebook.com.
  7. https://www.youtube.com/watch?v=248pX3jw_rA
  8. "Car struck in deadly collision with LIRR train was trying to go around gates". January 22, 2013.
  9. Strahan, Tracie. "LIRR Train Collides With Car at Crossing, 2 Killed". NBC New York.
  10. "LIRR turning to laser to clean tracks". Newsday.
  11. "MTA Capital Amendment, Page 11/12" (PDF). Archived from the original (PDF) on August 7, 2008.
  12. "MTA 2008-2013 Capital Plan, Page 68" (PDF).
  13. "Video shows new LIRR cars arriving". Newsday. July 12, 2018. Retrieved January 2, 2019.
  14. "Capital Program Oversight Committee Meeting October 2016" (PDF). mta.info. Metropolitan Transportation Authority. October 26, 2016. Retrieved November 17, 2016.
  15. "LIRR seeks M9A EMUs". Railway Age. December 6, 2017. Retrieved January 21, 2018.
  16. "Screen Shot 2019-07-24 at 7.17.32 PM". July 24, 2019 via Flickr.
  17. "Metro-North/LIRR Committee Meeting: June 2018". MTA. June 18, 2018.
  18. "Metro-North Railroad Committee Meeting" (PDF). Metropolitan Transportation Authority. November 13, 2018. p. 85. Archived from the original (PDF) on November 11, 2018. Retrieved December 1, 2018.

References

Media related to M1/M3 (railcar) at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.