Multispectral image

A multispectral image is one that captures image data within specific wavelength ranges across the electromagnetic spectrum. The wavelengths may be separated by filters or detected via the use of instruments that are sensitive to particular wavelengths, including light from frequencies beyond the visible light range, i.e. infrared and ultra-violet. Spectral imaging can allow extraction of additional information the human eye fails to capture with its visible receptors for red, green and blue. It was originally developed for military target identification and reconnaissance. Early space-based imaging platforms incorporated multispectral imaging technology[1] to map details of the Earth related to coastal boundaries, vegetation, and landforms.[2] Multispectral imaging has also found use in document and painting analysis.4

Multispectral imaging measures light in a small number (typically 3 to 15) of spectral bands. Hyperspectral imaging is a special case of spectral imaging where often hundreds of contiguous spectral bands are available.[3]

Applications

Military target tracking

Multispectral imaging measures light emission and is often used in detecting or tracking military targets. In 2003, researchers at the United States Army Research Laboratory and the Federal Laboratory Collaborative Technology Alliance reported a dual band multispectral imaging focal plane array (FPA). This FPA allowed researchers to look at two infrared (IR) planes at the same time.[4] Because mid-wave infrared (MWIR) and long wave infrared (LWIR) technologies measure radiation inherent to the object and require no external light source, they also are referred to as thermal imaging methods.

The brightness of the image produced by a thermal imager depends on the objects emissivity and temperature.[5]  Every material has an infrared signature that aids in the identification of the object.[6] These signatures are less pronounced in hyperspectral systems (which image in many more bands than multispectral systems) and when exposed to wind and, more dramatically, to rain.[6] Sometimes the surface of the target may reflect infrared energy. This reflection may misconstrue the true reading of the objects’ inherent radiation.[7] Imaging systems that use MWIR technology function better with solar reflections on the target's surface and produce more definitive images of hot objects, such as engines, compared to LWIR technology.[8] However, LWIR operates better in hazy environments like smoke or fog because less scattering occurs in the longer wavelengths.[5] Researchers claim that dual-band technologies combine these advantages to provide more information from an image, particularly in the realm of target tracking.[4]

For nighttime target detection, thermal imaging outperformed single-band multispectral imaging. Citation. Dual band MWIR and LWIR technology resulted in better visualization during the nighttime than MWIR alone. Citation Citation. The US Army reports that its dual band LWIR/MWIR FPA demonstrated better visualizing of tactical vehicles than MWIR alone after tracking them through both day and night.  

Land mine detection

By analyzing the emissivity of ground surfaces, multispectral imaging can detect the presence of underground missiles. Surface and sub-surface soil possess different physical and chemical properties that appear in spectral analysis.[6] Disturbed soil has increased emissivity in the wavelength range of 8.5 to 9.5 micrometers while demonstrating no change in wavelengths greater than 10 micrometers.[4] The US Army Research Laboratory's dual MWIR/LWIR FPA used "red" and "blue" detectors to search for areas with enhanced emissivity. The red detector acts as a backdrop, verifying realms of undisturbed soil areas, as it is sensitive to the 10.4 micrometer wavelength. The blue detector is sensitive to wavelengths of 9.3 micrometers. If the intensity of the blue image changes when scanning, that region is likely disturbed. The scientists reported that fusing these two images increased detection capabilities.[4]

Ballistic missile detection

Intercepting an intercontinental ballistic missile (ICBM) in its boost phase requires imaging of the hard body as well as the rocket plumes. MWIR presents a strong signal from highly heated objects including rocket plumes, while LWIR produces emissions from the missile's body material. The US Army Research Laboratory reported that with their dual-band MWIR/LWIR technology, tracking of the Atlas 5 Evolved Expendable Launch Vehicles, similar in design to ICBMs, picked up both the missile body and plumage.[4]

Space-based imaging

Most radiometers for remote sensing (RS) acquire multispectral images. Dividing the spectrum into many bands, multispectral is the opposite of panchromatic, which records only the total intensity of radiation falling on each pixel.[9] Usually, Earth observation satellites have three or more radiometers. Each acquires one digital image (in remote sensing, called a 'scene') in a small spectral band. The bands are grouped into wavelength regions based on the origin of the light and the interests of the researchers.

Weather forecasting

Modern weather satellites produce imagery in a variety of spectra. [10]

Multispectral imaging combines two to five spectral imaging bands of relatively large bandwidth into a single optical system. A multispectral system usually provides a combination of visible (0.4 to 0.7 µm), near infrared (NIR; 0.7 to 1 µm), short-wave infrared (SWIR; 1 to 1.7 µm), mid-wave infrared (MWIR; 3.5 to 5 µm) or long-wave infrared (LWIR; 8 to 12 µm) bands into a single system. — Valerie C. Coffey[11]

In the case of Landsat satellites, several different band designations have been used, with as many as 11 bands (Landsat 8) comprising a multispectral image.[12][13][14] Spectral imaging with a higher radiometric resolution (involving hundreds or thousands of bands), finer spectral resolution (involving smaller bands), or wider spectral coverage may be called hyperspectral or ultraspectral.[15][14]

Documents and artworks

The technology has also assisted in the interpretation of ancient papyri, such as those found at Herculaneum, by imaging the fragments in the infrared range (1000 nm). Often, the text on the documents appears to the naked eye as black ink on black paper. At 1000 nm, the difference in how paper and ink reflect infrared light makes the text clearly readable. It has also been used to image the Archimedes palimpsest by imaging the parchment leaves in bandwidths from 365–870 nm, and then using advanced digital image processing techniques to reveal the undertext with Archimedes' work.[16] Multispectral imaging has been used in a Mellon Foundation project at Yale University to compare inks in medieval English manuscripts.[17]

Multispectral imaging can be employed for investigation of paintings and other works of art.[18] The painting is irradiated by ultraviolet, visible and infrared rays and the reflected radiation is recorded in a camera sensitive in this regions of the spectrum. The image can also be registered using the transmitted instead of reflected radiation. In special cases the painting can be irradiated by UV, VIS or IR rays and the fluorescence of pigments or varnishes can be registered.[19]

Multispectral imaging has also been used to examine discolorations and stains on old books and manuscripts. Comparing the "spectral fingerprint" of a stain to the characteristics of known chemical substances can make it possible to identify the stain. This technique has been used to examine medical and alchemical texts, seeking hints about the activities of early chemists and the possible chemical substances they may have used in their experiments. Like a cook spilling flour or vinegar on a cookbook, an early chemist might have left tangible evidence on the pages of the ingredients used to make medicines.[20]

Spectral bands

The wavelengths are approximate; exact values depend on the particular satellite's instruments:

  • Blue, 450–515..520 nm, is used for atmosphere and deep water imaging, and can reach depths up to 150 feet (50 m) in clear water.
  • Green, 515..520–590..600 nm, is used for imaging vegetation and deep water structures, up to 90 feet (30 m) in clear water.
  • Red, 600..630–680..690 nm, is used for imaging man-made objects, in water up to 30 feet (9 m) deep, soil, and vegetation.
  • Near infrared (NIR), 750–900 nm, is used primarily for imaging vegetation.
  • Mid-infrared (MIR), 1550–1750 nm, is used for imaging vegetation, soil moisture content, and some forest fires.
  • Far-infrared (FIR), 2080–2350 nm, is used for imaging soil, moisture, geological features, silicates, clays, and fires.
  • Thermal infrared, 10400-12500 nm, uses emitted instead of reflected radiation to image geological structures, thermal differences in water currents, fires, and for night studies.
  • Radar and related technologies are useful for mapping terrain and for detecting various objects.

Spectral band usage
Further information: False-color

For different purposes, different combinations of spectral bands can be used. They are usually represented with red, green, and blue channels. Mapping of bands to colors depends on the purpose of the image and the personal preferences of the analysts. Thermal infrared is often omitted from consideration due to poor spatial resolution, except for special purposes.

  • True-color uses only red, green, and blue channels, mapped to their respective colors. As a plain color photograph, it is good for analyzing man-made objects, and is easy to understand for beginner analysts.
  • Green-red-infrared, where the blue channel is replaced with near infrared, is used for vegetation, which is highly reflective in near IR; it then shows as blue. This combination is often used to detect vegetation and camouflage.
  • Blue-NIR-MIR, where the blue channel uses visible blue, green uses NIR (so vegetation stays green), and MIR is shown as red. Such images allow the water depth, vegetation coverage, soil moisture content, and the presence of fires to be seen, all in a single image.

Many other combinations are in use. NIR is often shown as red, causing vegetation-covered areas to appear red.

Classification

Unlike other Aerial photographic and satellite image interpretation work, these multispectral images do not make it easy to identify directly the feature type by visual inspection. Hence the remote sensing data has to be classified first, followed by processing by various data enhancement techniques so as to help the user to understand the features that are present in the image.

Such classification is a complex task which involves rigorous validation of the training samples depending on the classification algorithm used. The techniques can be grouped mainly into two types.

  • Supervised classification techniques
  • Unsupervised classification techniques

Supervised classification makes use of training samples. Training samples are areas on the ground for which there is Ground truth, that is, what is there is known. The spectral signatures of the training areas are used to search for similar signatures in the remaining pixels of the image, and we will classify accordingly. This use of training samples for classification is called supervised classification. Expert knowledge is very important in this method since the selection of the training samples and a biased selection can badly affect the accuracy of classification. Popular techniques include the Maximum likelihood principle and Convolutional neural network. The Maximum likelihood principle calculates the probability of a pixel belonging to a class (i.e. feature) and allots the pixel to its most probable class. Newer Convolutional neural network based methods [21] account for both spatial proximity and entire spectra to determine the most likely class.

In case of unsupervised classification no prior knowledge is required for classifying the features of the image. The natural clustering or grouping of the pixel values, i.e. the gray levels of the pixels, are observed. Then a threshold is defined for adopting the number of classes in the image. The finer the threshold value, the more classes there will be. However, beyond a certain limit the same class will be represented in different classes in the sense that variation in the class is represented. After forming the clusters, ground truth validation is done to identify the class the image pixel belongs to. Thus in this unsupervised classification apriori information about the classes is not required. One of the popular methods in unsupervised classification is k-means clustering.

Multispectral data analysis software
  • MicroMSI is endorsed by the NGA.
  • Opticks is an open-source remote sensing application.
  • Multispec is freeware multispectral analysis software.[22]
  • Gerbil is open source multispectral visualization and analysis software.[23]

See also

References
  1. R.A. Schowengerdt. Remote sensing: Models and methods for image processing, Academic Press, 3rd ed., (2007)
  2. "13. Multispectral Image Processing | The Nature of Geographic Information". www.e-education.psu.edu. Retrieved 2019-11-14.
  3. Hagen, Nathan; Kudenov, Michael W. (2013). "Review of snapshot spectral imaging technologies". Optical Engineering. 52 (9): 090901. Bibcode:2013OptEn..52i0901H. doi:10.1117/1.OE.52.9.090901.
  4. Goldberg, A.; Stann, B.; Gupta, N. (July 2003). "Multispectral, Hyperspectral, and Three-Dimensional Imaging Research at the U.S. Army Research Laboratory" (PDF). Proceedings of the International Conference on International Fusion [6th]. 1: 499–506.
  5. "Primer on IR theory". Opto Engineering. Retrieved 2018-08-15.
  6. Makki, Ihab; Younes, Rafic; Francis, Clovis; Bianchi, Tiziano; Zucchetti, Massimo (2017-02-01). "A survey of landmine detection using hyperspectral imaging". ISPRS Journal of Photogrammetry and Remote Sensing. 124: 40–53. Bibcode:2017JPRS..124...40M. doi:10.1016/j.isprsjprs.2016.12.009. ISSN 0924-2716.
  7. Li, Ning; Zhao, Yongqiang; Pan, Quan; Kong, Seong G. (2018-06-25). "Removal of reflections in LWIR image with polarization characteristics". Optics Express. 26 (13): 16488–16504. Bibcode:2018OExpr..2616488L. doi:10.1364/OE.26.016488. ISSN 1094-4087. PMID 30119479.
  8. Nguyen, Chuong; Havlicek, Joseph; Fan, Guoliang; Caulfield, John; Pattichis, Marios (November 2014). "Robust dual-band MWIR/LWIR infrared target tracking". 2014 48th Asilomar Conference on Signals, Systems and Computers: 78–83. doi:10.1109/ACSSC.2014.7094401. ISBN 978-1-4799-8297-4. S2CID 9071883.
  9. "3.1.1. Multispectral and panchromatic images". STARS project. Retrieved 14 May 2018.
  10. https://doi.org/10.1175/1520-0450(2001)040<2115:REFACO>2.0.CO;2
  11. Coffey, Valerie C. (1 April 2012). "Multispectral Imaging Moves into the Mainstream". Optics and Photonics News. 23 (4): 18. doi:10.1364/OPN.23.4.000018. Retrieved 14 May 2018.
  12. "What are the band designations for the Landsat satellites?". U.S. Geological Survey. Archived from the original on January 22, 2017. Retrieved April 25, 2018.
  13. Grolier, Maurice J.; Tibbitts Jr., G. Chase; Ibrahim, Mohammed Mukred (1984). A qualitative appraisal of the hydrology of the Yemen Arab Republic from Landsat images Water Supply Paper 1757-P By. U.S. G.P.O. p. 19. Retrieved 14 May 2018.
  14. Tatem, Andrew J.; Goetz, Scott J.; Hay, Simon I. (2008). "Fifty Years of Earth-observation Satellites". American Scientist. 96 (5): 390–398. doi:10.1511/2008.74.390. PMC 2690060. PMID 19498953.
  15. "Multispectral vs Hyperspectral Imagery Explained". GIS Geography. 2014-07-23. Retrieved Feb 16, 2018.
  16. "Multi-spectral imaging of the Archimedes Palimpsest". The Archimedes Palimpsest Project. Retrieved 17 September 2015.
  17. Weiskott, Eric. "Multispectral Imaging and Medieval Manuscripts." In The Routledge research companion to digital medieval literature. Boyle, Jennifer E., and Helen J. Burgess. London: Routledge. Pp. 186–96.
  18. . Baronti, A. Casini, F. Lotti, and S. Porcinai, Multispectral imaging system for the mapping of pigments in works of art by use of principal-component analysis, Applied Optics Vol. 37, Issue 8, pp. 1299–1309 (1998)
  19. Multispectral imaging at ColourLex
  20. Avril, Tom (May 14, 2018). "Scans reveal secrets of medieval 'Harry Potter' book and medical texts at Penn". The Philadelphia Inquirer. Retrieved 14 May 2018.
  21. Ran, Lingyan; Zhang, Yanning; Wei, Wei; Zhang, Qilin (2017-10-23). "A Hyperspectral Image Classification Framework with Spatial Pixel Pair Features". Sensors. 17 (10): 2421. doi:10.3390/s17102421. PMC 5677443. PMID 29065535.
  22. Biehl, Larry; Landgrebe, David (2002-12-01). "MultiSpec: a tool for multispectral—hyperspectral image data analysis". Computers & Geosciences. 28 (10): 1153–1159. Bibcode:2002CG.....28.1153B. doi:10.1016/S0098-3004(02)00033-X. Retrieved 2017-04-28.
  23. Jordan, Johannes; Angelopoulou, Elli (2010). Gerbil - A Novel Software Framework for Visualization and Analysis in the Multispectral Domain. Vision. Modeling. doi:10.2312/PE/VMV/VMV10/259-266. ISBN 9783905673791.

Further reading
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.