Oil record book

All cargo vessels where MARPOL Convention is applicable must have an oil record book in which the chief engineer will record all oil or sludge transfers and discharges within the vessel. This is necessary for authorities to be able to monitor if a vessel's crew has properly disposed of their oil discharges at sea.[1]

Each oil tanker of 150 gross tons and above, ship of 400 gross tons and above other than an oil tanker, and manned fixed or floating drilling rig or other platform shall maintain an Oil Record Book Part I (Machinery Space Operations).[2] An oil tanker of 150 gross tons and above or a non-oil tanker that carries 200 cubic meters or more of oil in bulk, shall also maintain an Oil Record Book Part II (Cargo/Ballast Operation).[3]

Oil record book coding

In every entry the chief engineer must record tank number, location, type of oil, description of operation, and quantity. For every operation a combined numerical and letter coding is applied. MEPC.187(59) describes the codes applicable as from 1 January 2011.

According with revised MEPC.1/Circ736/Rev.2, issued 06 October 2011, additional amendments to oil record book entries have been implemented by IMO.

The first part of the oil record book deals with machinery space operations for all ships.[3] The second part of the oil record book is for cargo/ballast operations and this part only needs to be filled out by crew members aboard oil tankers.[2]

Entries shall be made in the oil record book on each occasion, on a tank to tank basis if appropriate, whenever any of the following machinery space operations take place on any ship to which this section applies—[3]

  1. Ballasting or cleaning of fuel oil tanks;
  2. Discharge of ballast containing an oily mixture or cleaning water from fuel oil tanks;
  3. Disposal of oil residue; and
  4. Discharge overboard or disposal otherwise of bilge water that has accumulated in machinery spaces.

Entries shall be made in the oil record book on each occasion, on a tank to tank basis if appropriate, whenever any of the following cargo/ballast operations take place on any oil tanker to which this section applies—[3]

  1. Loading of oil cargo;
  2. Internal transfer of oil cargo during voyage;
  3. Unloading of oil cargo;
  4. Ballasting of cargo tanks and dedicated clean ballast tanks;
  5. Cleaning of cargo tanks including crude oil washing;
  6. Discharge of ballast except from segregated ballast tanks;
  7. Discharge of water from slop tanks;
  8. Closing of all applicable valves or similar devices after slop tank discharge operations;
  9. Closing of valves necessary for isolation of dedicated clean ballast tanks from cargo and stripping lines after slop tank discharge operations; and
  10. Disposal of oil residue.

Electronic oil record book

An electronic alternative to handwritten oil record book on board vessels of all sizes. Marine electronic oil record books must meet the specific reporting requirements of IMO, SOLAS and flag states. Manually inserted information is normally combined with data recorded from the vessel's instruments and sensors, such as GPS data (time and position), flow-meters and tank gauges.[4]

See also

References
  1. "Oil Record Book" (PDF). Marine .Administration. Commonwealth of Dominica. Retrieved July 20, 2015.
  2. "Oil Record Book for Ships" (PDF). Oil Record Book for Ships. U.S Department of Homeland Security. Archived from the original (PDF) on May 1, 2015. Retrieved July 20, 2015.
  3. "33 CFR 151.25 - Oil Record Book. | US Law | LII / Legal Information Institute". www.law.cornell.edu. Retrieved 2015-07-28.
  4. "proimio pro-ORB - e-ORB electronic Oil Record Book®", proimio.com, Retrieved on 28 October 2012.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.