Operational availability

Operational availability in systems engineering is a measurement of how long a system has been available to use when compared with how long it should have been available to be used.

Definition

Operational availability is a management concept that evaluates the following.[1]

• Diagnostic down time
• Criticality
• Fault isolation down time
• Logistics delay down time
• Corrective maintenance down time

Any failed item that is not corrected will induce operational failure. ${\displaystyle A_{o}}$ is used to evaluate that risk. Operational failure is unacceptable in any situation where the following can occur.

• Capital equipment loss
• Injury or loss of life
• Sustained failure to accomplish mission

In military acquisition, operational availability is used as one of the Key Performance Parameters in requirements documents, to form the basis for decision support analyses.[2]

History

Aircraft systems, ship systems, missile systems, and space systems have a large number of failure modes that must be addressed with limited resources.

Formal reliability modeling during development is required to prioritize resource allocation before operation begins. Estimated failure rates and logistics delay are used to identify the number of forward positioned spare parts required to avoid excessive down time. This is also used to justify the expense associated with redundancy.

Formal availability measurement is used during operation to prioritize management decisions involving upgrade resource allocation, manpower allocation, and spare parts planning.

Principle

Operational availability is used to evaluate the following performance characteristic.

For a system that is expected to be available constantly, the below operational availability figures translate to the system being unavailable for approximately the following lengths of time (when all outages during a year are added together):

${\displaystyle A_{o}=0.9\approx 877\ hours\ down\ time\ per\ year}$

${\displaystyle A_{o}=0.99\approx 87\ hours\ down\ time\ per\ year}$

${\displaystyle A_{o}=0.999\approx 8\ hours\ down\ time\ per\ year}$

${\displaystyle A_{o}=0.9999\approx 52\ minutes\ down\ time\ per\ year}$

${\displaystyle A_{o}=0.99999\approx 5\ minutes\ down\ time\ per\ year}$

The following data is collected for maintenance actions while in operation to prioritize corrective funding.

• Diagnostic down time is required to identify the amount of time spent perform maintenance when fault reporting does not support condition-based maintenance.
• Criticality identifies level of risk associated with loss of mission, injury or loss of life, and capitol equipment.
• Fault isolation down time is required to identify the amount of time spent locating a failure.
• Logistics delay down time is required to identify the amount of time required to obtain replacement parts or software.
• Corrective maintenance down time is required to identify the amount of time required to install and reconfigure replacement parts and software.

This data is applied to the reliability block diagram to evaluate individual availability reduction contributions using the following formulas.

${\displaystyle A_{o}^{D}=\left({\frac {Total\ Time}{Total\ Time+Diagnostic\ Down\ Time}}\right)}$

${\displaystyle A_{o}^{FI}=\left({\frac {Total\ Time}{Total\ Time+Fault\ Isolation\ Down\ Time}}\right)}$

${\displaystyle A_{o}^{L}=\left({\frac {Total\ Time}{Total\ Time+Logistics\ Down\ Time}}\right)}$

${\displaystyle A_{o}^{C}=\left({\frac {Total\ Time}{Total\ Time+Corrective\ Down\ Time}}\right)}$

Redundant items do not contribute to availability reduction unless all of the redundant components fail simultaneously.

Operational availability is the overall availability considering each of these contributions.

${\displaystyle A_{o}=A_{o}^{D}\times A_{o}^{FI}\times A_{o}^{L}\times A_{o}^{C}}$

See also

• Active redundancy
• Availability
• Downtime
• Reliability block diagram

References

1. "Opnav Instruction 4790.7: Maintenance Policy for United States Navy Ships". US Navy Operations. Archived from the original on 2013-02-15.
2. "OPNAVINST 3000.12A, Operational Availability Handbook" (PDF). US Navy. 2 Sep 2003. Retrieved 29 Nov 2017.