Polariton laser

A polariton laser is a novel type of laser source that exploits the coherent nature of Bose condensates of exciton-polaritons in semiconductors to achieve ultra-low threshold lasing.[1]

In 1996, Imamoglu et al. proposed such a novel type of coherent light source and explained the concept[2] based on an effect closely related to Bose–Einstein condensation of atoms: A large number of bosonic particles (here: polaritons) form a condensate in a macroscopically occupied quantum state via stimulated scattering. The condensate of polaritons finally provides coherent emission of light. Thus, it is a coherent light source that owns a different working mechanism compared to conventional laser devices. Owing to its principle, a polariton-laser promises a more energy-efficient laser operation. The typical semiconductor structure for such a laser consists of an optical microcavity placed between distributed Bragg reflectors.

An early demonstration of polaritonic lasing and a comparison to conventional lasing was achieved in 2003 by H. Deng et al. at Stanford University under optical excitation[1] (Polaritonic condensation was later fully linked to dynamical Bose–Einstein condensation in 2006 by Kasprzak et al.[3]). However, electrical pumping of a polariton laser—crucial for a practical use of polaritonic light sources—was not demonstrated until 2013. Eventually, one decade later, the first and unambiguous demonstration of an electrically pumped polariton-laser was recently presented by a team of researchers from the University of Michigan [4] and by a team from University of Würzburg together with their international partners using the similar techniques.[5]

At this stage, the electrically driven device operates at very low temperatures around 10 K and needs a magnetic field applied in the Faraday geometry. In 2007, even room temperature operation of an optically pumped polariton laser was demonstrated,[6][7] promising the development of future electrically pumped polariton lasers for room temperature application.

It is important, and challenging, to distinguish polaritonic lasing from conventional (photonic) lasing, owing to the similar emission characteristics. A crucial element of the success by both teams lies in the hybrid nature of polaritons whose matter component (excitons) exhibits a sensitive response to an external magnetic field. The Michigan team led by Pallab Bhattacharya used a combination of modulation doping of the quantum wells in the active region, to enhance polariton-electron scattering, and an external magnetic field to enhance the polariton-phonon scattering and the exciton -polariton saturation density. With these measures they achieved a comparably low polariton lasing threshold of 12 A/cm2 (published in Physical Review Letters in May 2013). The investigations performed by the team in Würzburg, having started with the idea of engineering an electrical device in 2007, led to the desired effect after a few years in cooperation with their international partners from the U.S., Japan, Russia, Singapore, Iceland and Germany. Finally, their studies were complemented by a crucial experiment in a magnetic field:[8] an unambiguous verification of the emission-mode's matter component in the polaritonic laser regime was given, yielding a first-time experimental demonstration of an electrically pumped polariton laser by C. Schneider, A. Rahimi-Iman and co-authors in the team of S. Höfling (published in Nature in May 2013).

On June 5, 2014, Bhattacharya's team succeeded in creating what's believed to be the first polariton laser that is fueled by electric current as opposed to light, and also works at room temperature, rather than far below zero.[9]

References
  1. Deng, H.; Weihs, G.; Snoke, D.; Bloch, J.; Yamamoto, Y. (2003). "Polariton lasing vs. photon lasing in a semiconductor microcavity". Proc. Natl. Acad. Sci. USA. 100 (26): 15318–15323. Bibcode:2003PNAS..10015318D. doi:10.1073/pnas.2634328100. PMC 307565. PMID 14673089.
  2. Imamoglu, A.; Ram, R. J.; Pau, S.; Yamamoto, Y. (1996). "Nonequilibriumcondensates and lasers without inversion: exciton-polariton lasers". Phys. Rev. A. 53 (6): 4250–4253. Bibcode:1996PhRvA..53.4250I. doi:10.1103/PhysRevA.53.4250. PMID 9913395.
  3. Kasprzak, J.; Richard, M.; Kundermann, S.; Baas, A.; Jeambrun, P.; Keeling, J. M. J.; Marchetti, F. M.; Szymańska, M. H.; André, R.; Staehli, J. L.; Savona, V.; Littlewood, P. B.; Deveaud, B.; Dang, L. S. (2006). "Bose-Einstein condensation of exciton polaritons". Nature. 443 (7110): 409–414. Bibcode:2006Natur.443..409K. doi:10.1038/nature05131. PMID 17006506.
  4. Bhattacharya, P.; Xiao, B.; Das, A.; Bhowmick, S.; Heo, J. (2013). "Solid State Electrically Injected Exciton-Polariton Laser". Physical Review Letters. 110 (20): 206403. Bibcode:2013PhRvL.110t6403B. doi:10.1103/PhysRevLett.110.206403. PMID 25167434.
  5. Schneider, C.; Rahimi-Iman, A.; Kim, N. Y.; Fischer, J.; Savenko, I. G.; Amthor, M.; Lermer, M.; Wolf, A.; Worschech, L.; Kulakovskii, V. D.; Shelykh, I. A.; Kamp, M.; Reitzenstein, S.; Forchel, A.; Yamamoto, Y.; Höfling, S. (2013). "An electrically pumped polariton laser". Nature. 497 (7449): 348–352. Bibcode:2013Natur.497..348S. doi:10.1038/nature12036. PMID 23676752. S2CID 205233384.
  6. Christopoulos, S.; von Högersthal, G. B. H.; Grundy, A. J. D.; Lagoudakis, P. G.; Kavokin, A. V.; Baumberg, J. J.; Christmann, G.; Butté, R.; Feltin, E.; Carlin, J.-F.; Grandjean, N. (2007). "Room-Temperature Polariton Lasing in Semiconductor Microcavities". Phys. Rev. Lett. 98 (12): 126405. Bibcode:2007PhRvL..98l6405C. doi:10.1103/PhysRevLett.98.126405. PMID 17501142.
  7. Johnston, Hamish (27 May 2007). "Polariton laser reaches room temperature." Physics World.
  8. University of Würzburg (16 May 2013). "A New Type of Laser".
  9. "A new way to make laser-like beams using 250x less power - University of Michigan News".
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.