Raven Arms

Raven Arms was a firearms manufacturer established in 1970 by firearms designer George Jennings. The Gun Control Act of 1968 prohibiting the importation of inexpensive handguns prompted Jennings to design the MP-25, a .25-caliber semi-automatic pistol, and enter the firearms business. Raven has been referred to as the original "Ring of Fire" company; the Ring of Fire companies were those known for producing inexpensive Saturday night special handguns.[1]

Raven Arms
TypePrivate
Industryfirearms
Founded1970 (1970)
FounderGeorge Jennings
Defunct1991 (1991)
Headquarters
Carson City, Nevada, Irvine, California and Costa Mesa, California
,
U.S.
Area served
U.S.
Key people
Paul Jimenez
Productsweapons, Semi-automatic pistols

Raven kept manufacturing costs to a minimum by building their guns from injection-molded Zamak, a zinc alloy.

History

Before Jennings developed the MP-25, a friend who owned a pawn shop that sold firearms complained to Jennings that his supply of inexpensive imported handguns (typically made by Röhm Gesellschaft) had been cut off due to the Gun Control Act of 1968, resulting in a significant loss of sales. At the time, Jennings operated a machine shop that made parts for Southern California aerospace companies. Jennings established Raven Arms to produce the first Raven, the P-25 for his friend, and over the next 20 years, the company sold approximately 2 million variations of the pistols. The first variation of the Raven had a large button sliding safety on the side, and was manufactured in Baldwin Park, California. The second variation changed the safety to a smaller sliding safety, but retained the designation of P-25, and was manufactured in Industry, California (as were all other subsequent Ravens). The third variation changed the design of the pistol slide serrations and was designated the MP-25. The fourth and final variation of the pistol removed the sliding safety and changed it to an upward moving disk safety and retained the designation MP-25.[2] In parallel with this growth, gun-control advocates started pushing legislation in Washington, in state capitals, and in city councils to ban inexpensive weapons.

In November 1991, a fire destroyed the Raven Arms factory. Jennings retired and sold his designs to Phoenix Arms.[2] Phoenix was owned in equal shares by Jennings's ex-wife, his children, four of his grandchildren, and by Raven's former general manager. Phoenix continued to produce the MP-25 as the "Model Raven" and introduced a magazine safety disconnect which rendered the pistol unable to fire without a magazine inserted[2] Phoenix was run under the management of Jennings's son Bruce, and developed additional .22 and .25-caliber pistols, called the HP22 and HP25.

MP-25
MP-25
MP-25 with blued finish
TypeSemi-automatic pistol
Place of originUnited States
Production history
DesignerGeorge Jennings
Designed1960s
ManufacturerRaven Arms
Produced1970–1991
No. built3 million[3]
VariantsP-25
Specifications
Cartridge.25 ACP
ActionBlowback
Feed system6-round detachable box magazine
SightsPost and rear notch
Raven MP-25 Chrome with faux mother of pearl grips and push up safety.

The MP-25 can hold six .25 ACP rounds in the magazine, plus one in the chamber, and is finished in chrome, satin nickel or black. The grips can be either wood or imitation mother-of-pearl handles. There is a similar model called the Raven Arms P-25. Both have similar blowback and envelope designs and are essentially identical firearms.[4]

Early models have a sliding bar safety that will not allow the pistol to chamber a round or cock the striker if the safety is not in the fire position when the slide is pulled back. Later models have a push up safety that will not allow the action to be cycled at all when engaged.[4]

There are conflicting views on the MP-25. Critics refer to it by the pejorative term "Saturday night special", as it is both easily concealed and affordable enough that the poor can afford to purchase it.[1] However, Roy Innis, president of the activist group Congress of Racial Equality (CORE), rejected the pejorative term: "To make inexpensive guns impossible to get is to say that you're putting a money test on getting a gun. It's racism in its worst form."[5] Some advocates of the pistol say that it is reliable, despite its low cost.[6] Association of Firearm and Tool Mark Examiners (AFTE) reported that a Phoenix Arms Model Raven with an altered or damaged sear tip discharged unintentionally when the safety was moved "off" after the trigger had been pulled with the safety "on".[7]

Original flyer that came with the purchase of a P25.
Raven P-25 parts list

References
  1. Freudenberg, Nicholas (January 21, 2014). Lethal But Legal: Corporations, Consumption, and Protecting Public Health. Oxford University Press, USA. pp. 48–52. ISBN 978-0-19-993720-2.
  2. Brown, Peter Harry; Abel, Daniel G. (June 15, 2010). Outgunned: Up Against the NRA: The First Complete Insider Account of the Battle Over Gun Control. New York: Simon and Schuster. pp. 57, 157. ISBN 978-1-4516-0353-8.
  3. PBS. "frontline: hot guns: Interview with Bruce Jennings". Retrieved September 24, 2014.
  4. Wood, J B (October 21, 2007). Automatic Pistols Assembly/Disassembly. Iola, Wisconsin: Gun Digest Books. p. 535. ISBN 978-1-4402-2401-0.
  5. Harrison, Geoffrey (July 2, 2013). Lethal Weapons (Great Debates: Tough Questions / Smart History). Norwood House Press. ISBN 978-1599535920.
  6. Wood, J.B. (October 22, 2007). Automatic Pistols Assembly/Disassembly. Gun Digest Books. ISBN 9781440224010.
  7. Raven 25 "Firearm Recalls & Warnings Index" Check |url= value (help). Retrieved July 6, 2015.

See also
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.