Rolls-Royce Silver Dawn
The Rolls-Royce Silver Dawn is a full-size luxury car that was produced by Rolls-Royce at their Crewe works between 1949 and 1955. It was the first Rolls-Royce car to be offered with a factory built body which it shared, along with its chassis, with the Bentley Mark VI until 1952 and then the Bentley R Type until production finished in 1955. The car was first introduced as an export only model. The left hand drive manual transmission models had a column gear change, while right hand drives had a floor change by the door. Only with the R Type based model was it officially available on the home market, from October 1953.[1][4]
| Rolls-Royce Silver Dawn | |
|---|---|
 | |
| Overview | |
| Manufacturer | Rolls-Royce Ltd |
| Production | 1949–1955 760 made[1] |
| Body and chassis | |
| Class | Full-size luxury car (F) |
| Body style | 4-door saloon |
| Layout | Front-engine, rear-wheel-drive |
| Related | Silver Wraith Bentley Mark VI Bentley R Type |
| Powertrain | |
| Engine | 4.2 L (260 cu in) I6 4.6 L (280 cu in) I6 |
| Transmission | 4-speed manual or 4-speed automatic |
| Dimensions | |
| Wheelbase | 120 in (3,048 mm)[2] |
| Length | 4877 to 5334 mm (192 to 210 inches)[2] |
| Width | 69 in (1,753 mm)[3] |
| Height | 64.5 in (1,638 mm)[3] |
| Chronology | |
| Predecessor | None |
| Successor | Silver Cloud |
In 1944 W. A. Robotham saw that there would be limited postwar demand for Rolls-Royce or Bentley chassis with a body from a specialist coachbuilder, and negotiated with the Pressed Steel Company a contract for a general-purpose body to carry four people in comfort on their postwar chassis behind a Rolls-Royce or Bentley radiator. Though he stretched the demand to 2000 per year, Pressed Steel were "nonplussed" by the small demand.[5]
A mere 760 were produced between 1949 and 1955. Silver Dawn Series A-D had bodywork identical to the Mark VI. In 1953, with the "E" series (Chassis Number SKE2), the Silver Dawn body was modified in parallel to the Bentley Mk VI body and a large boot was added.[6] While the Bentley Mk VI was renamed the Bentley R after this change, the Rolls Royce Silver Dawn kept its name. On the Standard Steel cars throughout the production history, all the body panels forward of the bulkhead/firewall were slightly different from those fitted to the Bentley.[1]
In 1951 the Silver Dawn was upgraded to the 4 1/2 L engine and the full flow oil filter (Chassis Number LSFC2). In 1953 the high compression cylinder head was fitted from Chassis number SMF66 and from the same chassis number on the Bentley Mk VI type camshaft was fitted to left hand drive vehicles.[7] Earlier models up to circa May 1954 had a different fascia (dashboard) from the Bentley Mk.VI and 'R' Type, and were fitted with a single exhaust system. Later models from the SRH2 chassis series had the Bentley style fascia and the twin exhaust system, as fitted to the Bentley 'R' Type.
1952 Model Rolls Royce Silver Dawn ("small boot").jpg.webp)
Late Model Rolls Royce Silver Dawn ("big boot")
Model Rolls Royce Silver Dawn, Park Avenue - New York City
The in-line six cylinder engine had overhead inlet and side exhaust valves and had a capacity of 4,257 cc (259.8 cu in) until 1951 when it was enlarged to 4,566 cc (278.6 cu in). The carburettor up to Chassis number SFC100 was a single double downdraught Stromberg type AAV 26 until 1952 when it was replaced by a Zenith DBVC42.[8][2]
A four speed manual gearbox was fitted to all cars at first, with a 4-speed automatic becoming an option in late 1952 on the 'E' Series chassis, and on the corresponding Bentley 'R' Type chassis. There are conflicting reports if the automatic gearbox became standard in the Silver Dawn, but both manual and automatic options were available until the end of the production run[9][10]
The suspension was independent at the front using coil springs while at the rear the live axle used half elliptic leaf springs. The car had a separate chassis made with traditional riveted construction until 1953 after which it was welded. Servo assisted 12.25 in (311 mm) drum brakes were used, hydraulically operated at the front but retaining mechanical operation at the rear. Although many cars were fitted with factory built bodies, others were supplied to external coachbuilders.
Performance
A factory bodied Silver Dawn with automatic transmission tested by The Motor magazine in 1954 had a top speed of 94.0 mph (151.3 km/h) and could accelerate from 0-60 mph (97 km/h) in 15.2 seconds. A fuel consumption of 15.4 miles per imperial gallon (18.3 L/100 km; 12.8 mpg‑US) was recorded. The test car cost £4704 including taxes.[3]
References
- Martin Cannell
- The Rolls-Royce Motor Car. Anthony Bird and Ian Hallows. Batsford Books. 2002 ISBN 0-7134-8749-6
- "The Rolls-Royce Silver Dawn". The Motor. 5 May 1954.
- A-Z of Cars 1945-1970. Michael Sedgwick and Mark Gillies. Bay View Books. 1986. ISBN 1-870979-39-7
- Robotham, William Arthur (1970). Silver Ghosts and Silver Dawn. London: Constable. pp. 198–200.
- Taylor, James. Original Rolls-Royce & Bentley 1946-65: The Restorer's Guide to the 'standard' saloons and mainstream coachbuilt derivatives (Original Series). P54ff. Herridge & Sons Ltd., 2008. ISBN 9781906133061.
- Taylor, James. Original Rolls-Royce & Bentley 1946-65: The Restorer's Guide to the 'standard' saloons and mainstream coachbuilt derivatives (Original Series). P58. Herridge & Sons Ltd., 2008. ISBN 9781906133061.
- Taylor, James. Original Rolls-Royce & Bentley 1946-65: The Restorer's Guide to the 'standard' saloons and mainstream coachbuilt derivatives (Original Series). P59. Herridge & Sons Ltd., 2008. ISBN 9781906133061.
- Taylor, James. Original Rolls-Royce & Bentley 1946-65: The Restorer's Guide to the 'standard' saloons and mainstream coachbuilt derivatives (Original Series). P60. Herridge & Sons Ltd., 2008. ISBN 9781906133061.
- Martin Cannell.