Sacramento Valley Railroad (1852–1877)

The Sacramento Valley Railroad (SVRR) was incorporated on August 4, 1852, the first transit railroad company incorporated in California. Construction did not begin until February 1855 because of financial and right of way issues, and its first train operated on February 22, 1856. Although the oldest working railroad in the state was the Arcata and Mad River Railroad, first operational in December 15, 1854,[1]:41 the Sacramento Valley Railroad was the West's pioneering incorporated railroad, forerunner to the Central Pacific.[2][3]

Original SVRR route
From Report of the Chief Engineer Theodore Judah: Preliminary Surveys and Future Business of the Sacramento Valley Railroad (Sacramento, Democratic State Journal, 1854).
Cross and longitudinal views of a section of the original 35-pound-per-yard (17.4 kg/m) Welsh iron "pear" rail used to lay the SVRR in 1856

On August 4, 1852, the Sacramento Valley Railroad was incorporated in California, and Charles Lincoln Wilson became its first president. He left for New York to find expertise and private funds for the railroad effort; he recruited a young survey engineer Theodore D. Judah from New York to come west with him to Sacramento.[2] Judah arrived in mid-May 1854, and on May 30 his report and preliminary survey for the proposed SVRR line eastward from Sacramento to Marysville by way of Folsom were in the hands of his employers.[4][5]

Because of financial and right of way issues, construction with grading subcontractors did not begin until February 1855, but soon other problems arose. In August 1855, the SVRR board elected Commodore C. K. Garrison, former mayor (1853-1854) of San Francisco, as president of SVRR. They also elected as vice president of SVRR the future American Civil War General William Tecumseh Sherman, who was at that time the head of the banking house of Lucas & Turner in San Francisco. William Sherman, contacted his brother John, who had recently been elected to Congress, for help in obtaining federal land grants for the railroad, but to no avail.[3]

The board also in August 1855 announced that the actual laying of tracks can begin. The railroad's gauge was 5 ft 3 1⁄2 in (1,613 mm), (7 inches (180 mm) wider than 4 ft 8 1⁄2 in (1,435 mm) standard gauge) and was laid with 60-pound-per-yard (29.8 kg/m) Welsh iron "pear" rail. Mastering the technique, the track laying crew were putting down six hundred feet of track daily.[2]

The original plans for a line from Sacramento to Folsom and then to Marysville were not fully realized as the funding did not materialize. As constructed, the Sacramento Valley Railroad ran from the Sacramento River levee at Front and "L" Street in present-day Old Sacramento and terminated at Folsom. On February 22, 1856, the first train operated over the entire 22.9-mile (36.9 km) line.

Theodore Judah was the Chief Engineer of the Sacramento Valley Railroad. Judah would later become the Chief Engineer of the Central Pacific Railroad and the chief proponent of the first transcontinental railroad over the Sierra Nevada by way of Dutch Flat.

On April 19, 1877, the Sacramento Valley Railroad was consolidated with the Folsom and Placerville Railroad to form the Sacramento and Placerville Railroad. In 1877 the Placerville and Sacramento Valley Railroad was also deeded to the Sacramento and Placerville Railroad. The new railroad operated over 49.1 miles (79.0 km) of track between Sacramento and Shingle Springs.

The railroad eventually came under the control of the Southern Pacific Railroad (SP); first under SP's subsidiary, the Northern Railway in 1888, and then ten years later under the SP on April 14, 1898.

The route as it exists now

Today much of the original route still exists and was the former Placerville Branch of the Southern Pacific. The Placerville Industrial Lead is used by Union Pacific Railroad and extends to the Aerojet facility just west of Folsom. The Sacramento RT Light Rail Gold Line parallels the route and uses the right of way between Sacramento and Folsom.

Most of SVRR's planned route was built by subsequent railroad companies after 1869. A notable historic section is still in operation today as Niles Canyon Railway that linked Sacramento to the San Francisco Bay Area through Niles, California.

See also

References
  1. Katy M. Tahja (2013). Logging Railroads of Humboldt and Mendocino Counties. Arcadia Publishing. pp. 33–. ISBN 978-0-7385-9621-1.
  2. Briggs, Robert (September 22, 1957). "Building the Sacramento Valley Railroad". Original HoboNickel Society. Pacific Coast Chapter, Railway & Locomotive Historical Society: "Hangtown Express". Retrieved 9 May 2019. ...the story of California's pioneer railroad, forerunner of the mighty Central Pacific.
  3. Noble, Doug (November 2010). "The Sacramento Valley Railroad: The first railroad of the West". Mountain Democrat. Placerville, California. Retrieved 9 May 2019.
  4. "Railroad Beginnings in California: Sacramento Valley Railroad". Rails West. Retrieved 9 May 2019.
  5. Lewis, Oscar (August 8, 1938). The Big Four. New York, New York: Alfred A Knopf. p. 11.

Further reading
  • Fickewirth, Alvin A. (1992). California railroads: an encyclopedia of cable car, common carrier, horsecar, industrial, interurban, logging, monorail, motor road, shortlines, streetcar, switching and terminal railroads in California (1851-1992). San Marino, CA: Golden West Books. ISBN 0-87095-106-8.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.