Shepherd Gate Clock

The Shepherd Gate Clock is mounted on the wall outside the gate of the Royal Greenwich Observatory building in Greenwich, Greater London. The clock, an early example of an electric clock, was a slave mechanism controlled by electric pulses transmitted by a master clock inside the main building. The network of master and slave clocks was constructed and installed by Charles Shepherd in 1852. The clock by the gate was probably the first to display Greenwich Mean Time to the public, and is unusual in using the 24-hour analog dial. Also it originally showed astronomical time which started at 12 noon not midnight.

Shepherd Gate Clock at Royal Greenwich Observatory

The gate clock distributed the time publicly, another time signal of the observatory was the time ball, since 1833. The time ball only showed 1 pm (13:00), but could be seen from afar. Eventually the idea of distributing time signals for the wires lead to more and more electrical distribution of time signals by this method. Time signals, besides from their general importance in the affairs of business, were especially important for ships and running trains for example; and the situation was exacerbated by a lack of accuracy in many clocks in the modern sense.

Summary

The system was first developed for the 1851 Great Exhibition (aka the Crystal Palace Exhibition in London), which lead to Airy installing a Shepherd Master and Slave clock system at the observatory.[1] The time comes from the Shepherd Master Clock inside the observatory.[1] In 1866 the time signal from the Shepherd Master Clock were sent across the Atlantic via cable to America.[2]

Origins
Mechanism of the slave clock

The original idea for the clock network came from the Astronomer Royal, George Airy. With the arrival of the railway network, a single time standard was needed to replace the various incompatible local times then in use across the country. Airy proposed that this standard time would be provided by the Royal Observatory. His idea was to use what he called "galvanism" or electric signalling to transmit time pulses from Greenwich to slave clocks throughout the country, and perhaps to Europe and the colonies too. The new undersea cable recently installed between Dover to Calais in 1851 raised the possibility of sending time signals between England and France – this would allow longitude differences to be measured very accurately, for the first time.

Charles Shepherd

In 1849 Charles Shepherd Junior (1830–1905),[3]an engineer and son of a clockmaker, patented a system for controlling a network of master and slave clocks using electricity (or galvanism, as it was called). Shepherd installed the public clocks for the Great Exhibition which opened in May 1851. In October 1851, Airy wrote to Charles Shepherd asking for proposals and estimates, including a request for the following clocks:

One automatic clock. One clock with large dial to be seen by the Public, near the Observatory entrance, and three smaller clocks, all to be moved sympathetically with the automatic clock.

Airy also wanted the existing Greenwich time ball to be electrically operated, so that its descent at 13:00 was synchronised with the master clock inside the observatory.

By August 1852 Shepherd had built and installed the network of clocks and cables in the observatory. Costs were considerably higher than the original estimates. Shepherd had estimated £40 for the master clock and time ball apparatus, and £9 for each sympathetic clock. The total costs included £70 for the master clock, and £75 for the wall clock by the gate.

Shepherd was later appointed to oversee the construction of a telegraph network for the Indian Government in 1853.[3]

Transmitting Greenwich time

The master clock,[4] at first called the Normal Clock or Master Clock, but later known as the Mean Solar Standard Clock, sent pulses every second to sympathetic or slave clocks in the Chronometer Room, the Dwelling House (Flamsteed House), and at the gate (the Gate Clock).[5] A pulse was sent to the time ball at 13:00. The signals were also transmitted along cables from Greenwich to London Bridge. From London Bridge a time signal was distributed at less frequent intervals by telegraph wires to clocks and receivers in London, Edinburgh, Glasgow, Dublin, Belfast and many other cities. From 1866 time signals were also sent to US Harvard University via the new transatlantic submarine cable.[4]

Airy's report to the Observatory's Board of Visitors in 1853 explained the function of the Shepherd master clock:

This clock keeps in motion a sympathetic galvanic clock in the Chronometer room, which, therefore, is sensibly correct; and thus the chronometers are compared with a clock which requires no numerical correction.

The same Normal Clock maintains in sympathetic movement the large clock at the entrance-gate, two other clocks in the Observatory, and a clock at the London Bridge Terminus of the South-Eastern Railway.

It sends galvanic signals every day along all the principal railways diverging from London. It drops the Greenwich Ball and the Ball on the Offices of the Eastern Telegraph Company in the Strand.

All these various effects are produced without sensible error of time; and I cannot but feel a satisfaction in thinking that the Royal Observatory is thus quietly contributing to the punctuality of business through a large portion of this busy country.

Since installation
The Flamsteed house overlooks the Gate clock, 1960

The Gate Clock originally indicated astronomical time, in which the counting of the 24 hours of each day starts at noon. The clock was changed in the 20th century to indicate Greenwich Mean Time, in which the counting of the 24 hours of each day starts at midnight. The Gate Clock continues to show Greenwich Mean Time and is not adjusted for summer time. The clock is now controlled by a quartz mechanism inside the main building. The master clocks are still on display but are not functional.

The Timeball Museum in Deal contains another slave clock once connected to the Greenwich master clock.

On 15 October 1940, during the World War II Blitz, the dial was damaged by a bomb, but the mechanism survived. The dial was replaced by an exact replica.[6]

See also

Notes
  1. "Shepherd master clock". Royal Museums Greenwich | UNESCO World Heritage Site In London. 2015-09-14. Retrieved 2019-11-09.
  2. "Shepherd master clock". Royal Museums Greenwich | UNESCO World Heritage Site In London. 2015-09-14. Retrieved 2019-11-09.
  3. "Electrical master clock". National Maritime Museum - Collections. Retrieved 3 May 2017.
  4. "Shepherd master clock". Royal Museums Greenwich. Retrieved 3 May 2017.
  5. "Shepherd gate clock". Royal Museums Greenwich. Retrieved 3 May 2017.
  6. "The Royal Observatory Greenwich - The Shepherd Gate Clock". Royal Observatory Greenwich. Retrieved 3 May 2017. A very detailed history of the Shepherd Gate Clock.

References
  • Howse, Derek (1997) Greenwich Time and the Longitude, Official Millennium ed., London : Philip Wilson, National Maritime Museum, ISBN 0-85667-468-0
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.