Baarn railway station

Baarn is a railway station on the Amsterdam–Zutphen railway and the Den Dolder–Baarn railway located in Baarn, Netherlands. The station is operated by the Nederlandse Spoorwegen (NS). The station was opened on 10 June 1874.

Baarn
LocationBaarn, Netherlands
Coordinates52°12′29″N 5°16′52″E
Line(s)Amsterdam–Zutphen railway
Den Dolder–Baarn railway
History
Opened10 June 1874
Services
Preceding station   Nederlandse Spoorwegen   Following station
NS Sprinter 5500
2x/hour
Terminus
toward Hoofddorp
NS Sprinter 5800
2x/hour; Not on evenings and weekends
NS Sprinter 5800
2x/hour; Evenings and weekends only
Terminus
Location
Baarn
Location within Northeastern Randstad

Baarn station is the station the Dutch royal family use, when arriving/leaving Soestdijk Palace. For this use it has a royal waiting room.

The station has 4 platforms. Platform 1 is joined to the station building. This platform is out of use. Platforms 2 and 3 form an island platform and are for trains to Amersfoort and Amsterdam. Platform 4 is used for trains to/from Utrecht Centraal.

In the early days, the HSM had a railway station, for trains to Amsterdam and Amersfoort, this was on the Oosterspoorweg, and the nearby station Baarn Buurtstation, which was for the train to Utrecht. In 1938 the companies became part of the station NS, however Baarn Buurtstation was not closed until the Stichtse lijn was electrified in 1948. The station was rebuilt, with a platform 4 for the Utrecht train, to prevent delays of Intercitys passing through the station. Since March 2009, platform 1 is no longer used for passenger services.

Train services

The following train services call at Baarn:

Route Service type Notes
Utrecht - Baarn Local ("Sprinter") 2x per hour
Amsterdam Centraal - Hilversum - Amersfoort Vathorst Local ("Sprinter") 2x per hour

Bus services

The station is served by lines 272, 572, 573 and N70.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.