Barton Highway

The Barton Highway[1] is a short highway in New South Wales and the Australian Capital Territory, Australia.

Barton Highway New South Wales –Australian Capital Territory
General information
Type	Highway
Length	52 km (32 mi)
Route number(s)	A25 M25 (from 2023)
Former route number	National Highway 25
Major junctions
North end	Hume Highway, Yass, New South Wales
	for full list see major intersections
South end	Federal Highway, Canberra, Australian Capital Territory
Location(s)
Major settlements	Murrumbateman
Highway system
Highways in Australia National Highway • Freeways in Australia Highways in New South Wales Road infrastructure in Canberra

The Barton Highway connects Canberra to the Hume Highway at Yass, and it is part of the route from Melbourne to Canberra and is named in honour of Sir Edmund Barton, the first Prime Minister of Australia.

Intersection of the Federal Highway, Barton Highway and Northbourne Avenue.

Route and history

Proclaimed a state highway in 1935, it was officially named as the Barton Highway in August 1954, signposted as National Route 25 two years later, fully sealed by 1960, and granted national highway status in 1974. The original purpose of the Yass-Canberra Road was to connect surrounding towns with the newly established national capital. Prior to the highway's establishment a series of trunk routes connected farming locations in the Yass Valley.[2]

Heading east from Yass, the Barton Highway originally commenced at a junction on the Hume Highway, near the historic Cooma Cottage, and east of the Yass River.[3] Requiring traffic to make a right–hand turn across a single lane of the Hume Highway, the highway commenced at this point and tracked generally south by southeast, through undulating hills to the village of Murrumbateman and entering the Australian Capital Territory (ACT), going through the village and main street of Hall, and meeting the Federal Highway at Lyneham at a junction near Sullivans Creek on Mouat Street, adjacent to Lyneham High School and to the south of the Highway's current alignment.[3]

The first realignment occurred during the late 1970s, when the southern terminus of the highway was relocated north, to the north of the Yowani Country Club.[3] In 1980 the village of Hall was bypassed; and during the early 1990s a dual carriageway was completed on the ACT section of the highway, between Hall and Kaleen. A further section of dual carriageways was completed in December 2002, between Gungahlin Drive and the southern terminus with the Federal Highway.[2]

Between April 1993 and May 1995, as part of the Hume Highway bypass of Yass, a 9-kilometre (5.6 mi) dual carriageway deviation of Barton Highway was constructed to connect the Barton Highway with the new route of the Hume Highway, north of Yass. The new route crosses the Yass River on twin bridges to the east of Cooma Cottage before terminating at the Hume Highway about 3 kilometres (1.9 mi) northeast of Yass.[3]

The Gundaroo Drive/Barton Highway round-about is surrounded by a number of trees to the south of the intersection. The pine tree plantation was originally planted in the shape of a map of Australia

Murrumbateman bypass and staged duplication

The Barton Highway passes through farmlands and the NSW town of Murrumbateman. In October 2001 the Australian Government announced that they would bypass to the town to the east. A$20 million was set aside in the 2006 federal budget for planning and duplication costs associated with the bypass.[4] The same year, the National Roads and Motorists' Association had named the Barton Highway as the worst highway on the Auslink National Network in New South Wales; accounting for three road fatalities annually.[5][6] While 42 kilometres (26 mi) of the 52-kilometre (32 mi) highway are located in New South Wales (NSW), only 6 kilometres (3.7 mi) of the NSW section are dual carriageway.[2]

Various NSW[7] and Federal[8] governments have committed funding towards improvements to the Barton Highway, including a bypass east of Murrumbateman and a staged duplication to create 33 kilometres (21 mi) of dual carriageways.[9] Stage one of construction work has commenced and is scheduled to be completed by 2023.

Major intersections

State	LGA / District	Location	km[10]	mi	Destinations	Notes
New South Wales	Yass Valley	Yass	0	0.0	Hume Highway (M31) – Gundagai, Melbourne, Goulburn, Sydney	Northern highway terminus; trumpet interchange
			4.6	2.9	Yass Valley Way – Yass	Dumbbell interchange
		Murrumbateman	18.3	11.4	Murrumbateman Road – Gundaroo, Bungendore
		Wallaroo	40.1	24.9	New South Wales–Australian Capital Territory border
Australian Capital Territory	Hall	Hall
	Gungahlin	Kinleyside–Nicholls boundary	43.4	27.0	Kuringa Drive (Tourist Drive 4) south-west / Clarrie Hermes Drive north-east – Fraser, Belconnen, Ngunnawal	Tourist Drive 4 northern concurrency terminus
	Gungahlin–Belconnen boundary	Nicholls–Crace–Giralang tripoint	46.1	28.6	William Slim Drive west / Gundaroo Drive east – Belconnen, Gungahlin, Gundaroo	Roundabout
		Crace–Mitchell–Kaleen tripoint	49.8	30.9	Gungahlin Drive – Mitchell, Belconnen, Woden	Parclo interchange
	North Canberra	Lyneham–Downer border	52.0	32.3	Federal Highway (A23) north-east / Northbourne Avenue (A23 / Tourist Drive 4) south – Goulburn, City Centre, Queanbeyan, Cooma	Southern highway terminus; Tourist Drive 4 continues south
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus

See also

• Highways in Australia
• List of highways in New South Wales

References

1. National Route 25, Ozroads: the Australian Roads Website. Retrieved 11 May 2008.
2. "Barton Highway". OzRoads. Retrieved 20 March 2015.
3. "Barton Highay: Former alignments". OzRoads. Retrieved 20 March 2015.
4. "Labor commits $20m to improving Barton Highway". ABC News. Australia. 21 November 2007. Retrieved 20 March 2015.
5. Hodgkinson, Katrina (17 June 2008). "Barton Highway Funding". Hansard. Parliament of New South Wales. Archived from the original on 2 April 2015. Retrieved 20 March 2015.
6. Hodgkinson, Katrina (15 May 2008). "Murrumbateman Bypass". Hansard. Parliament of New South Wales. Archived from the original on 2 April 2015. Retrieved 20 March 2015.
7. "Barton Highway duplication: Preferred road corridor boundaries report" (PDF). Manidis Roberts Pty Ltd (PDF). Roads & Maritime Services, Government of New South Wales. November 2011. ISBN 978-1-922040-05-3. Retrieved 20 March 2015.
8. Albanese, Anthony (22 October 2012). "Barton Highway: Federal Labor delivers more safety upgrades" (Press release). Australian Government.
9. Taylor, Angus (3 September 2014). "Barton Highway duplication plan". Yass Tribune. Retrieved 20 March 2015.
10. Google (8 April 2014). "Barton Highway" (Map). Google Maps. Google. Retrieved 8 April 2014.

External links