Colour Genie

The EACA EG2000 Colour Genie was a computer produced by Hong Kong-based manufacturer EACA and introduced in Germany in August 1982. The company went bankrupt when its founder left it with a suitcase of money. TCS in Germany St, Augustin, near Bonn went bankrupt later. It followed their earlier Video Genie I and II computers and was released around the same time as the business-oriented Video Genie. The BASIC was compatible with the Video Genie I and II and the TRS-80, except for graphic and sound commands; most of the routines for Video Genie I BASIC commands were left over in the Colour Genie's BASIC ROM. Programs were provided to load TRS-80 programs into the Colour Genie. Colour Genie disks could be read in a TRS-80 floppy disk drive and vice versa, editing the pdrive commands.

EACA EG2000 Colour Genie
EG2000 Colour Genie computer
ManufacturerEACA
Release dateAugust 1982 (1982-08)
Introductory price£200 (equivalent to £711 in 2019)
Operating system16 KB ROM containing LEVEL II BASIC
CPUZilog Z80, 2 MHz
Memory16 KB RAM, expandable to 32 KB
Input63-key typewriter style Keyboard with 4 programmable function keys
Power5V DC, +12V DC and -12V DC
PredecessorVideo Genie

The original Video Genies had been based upon (and broadly compatible with) the then-current TRS-80 Model I. As the Colour Genie was descended from this architecture, it was incompatible with Tandy's newer TRS-80 Color Computer which - despite its name - was an entirely new and unrelated design based on an entirely different CPU, and thus incompatible with the TRS-80 Model I and derivatives such as the Color Genie.

A 80 column card was produced. The Colour Genie was sold by Schmittke Electronics in Aachen, near the dutch and Belgian border were later was Vobis, which sold the Commodore 2000. In Aachen as Vobis reperatur service.

A Colour Genie computer

Technical specifications

Central Processing Unit

NEC D780 (unlicenced clone of Zilog Z80) running at 2.2 Mhz

Internal hardware
  • Video Hardware
    • Motorola 6845 CRTC
    • 40×24 text (original ROMs) or 40×25 text (upgraded ROMs), 16 colours, 128 user defined characters
    • 160×96 graphics (original ROMs) or 160×102 graphics (upgraded ROMs), 4 colours x up to 4 pages
  • Sound Hardware

I/O ports and power supply
EACA EG2000 Colour Genie ports
  • I/O ports:
    • Composite video out and audio out (cinch plugs)
    • Integrated RF modulator antenna output, which also carries sound, to TV
    • Cartridge expansion slot (slot for edge connector with Z80 CPU address/data bus lines and control signals, as well as GND and voltage pins; used for ROM cartridges or the floppy disk controller
    • 1200 baud tape interface (5 pin DIN)
    • RS-232 port (5 pin DIN)
    • Lightpen port (5 pin DIN)
    • Parallel port for printer or joystick controller

External hardware options
  • Floppy disk controller with floppy disk station.
    • Supported up to 4 drives (5.25 inch).
    • Support for 90 KB SS/SD up to 720 KB DS/DD drives.
  • Cassette recorder
  • EPROM cartridge of 12 KB
  • EG2013 Joystick Controller
    • 2 Analogue joysticks with keypad
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.