Ford Taunus V4 engine

The Ford Taunus V4 engine is a 60° V4 piston engine with one balance shaft, introduced by Ford Motor Company in Germany in 1962. The German V4 was built in the Cologne plant and powered the Ford Taunus and German versions of the Consul, Capri, and Transit.

Ford Taunus V4
Ford Taunus V4 in a Saab Sonett III
Overview
ManufacturerFord Motor Company
Also calledTaunus V4
Production1962 - 1981
Layout
Configuration60° V4
Displacement
  • 1.2 L (1,183 cc)
  • 1.3 L (1,288 cc)
  • 1.5 L (1,498 cc)
  • 1.7 L (1,699 cc)
Cylinder bore80 mm (3.15 in)
84 mm (3.31 in)
90 mm (3.54 in)
Piston stroke58.86 mm (2.317 in)
66.8 mm (2.63 in)
Block materialCast iron
Head materialCast iron
ValvetrainOHV 2 valves per cylinder
Combustion
SuperchargerNaturally aspirated (stock)
TurbochargerNone
Fuel systemCarbureted
Fuel typeGasoline (Leaded)
Oil systemWet sump (stock)
Cooling systemJacketed block (stock)
Output
Power output40–240 hp (30–179 kW)
Torque output80–137 N⋅m (59–101 lb⋅ft)

Design
Balance shaft

In common with other V4 and V6 engines, but unlike longer V engines with more cylinders, the connecting rods do not share a crankpin on the crankshaft.

The V4 was later expanded into the Ford Cologne V6 engine that was used in the Ford Capri, Ford Taunus, Ford Cortina, Ford Consul, Ford Granada, Ford Sierra, Ford Scorpio, Ford Ranger, Ford Explorer, Ford Mustang, Mercury Capri, and many other cars. The V4 engine was also used in industrial applications: pumps, electrical generators, and in agricultural machinery and snowcats. In automobiles, the Taunus V4 was replaced by the Ford OHC/Pinto engine.

Initially the V4 engine was designed by Ford for a new entry compact car intended for the US market to be called the Ford "Cardinal", which eventually evolved into the Taunus 12m P4. Ford abandoned the "Cardinal" project and instead built the Ford Falcon for North America. Ford then sought other uses for the V4 engine which was initially tested in the Saab 96. Ford bought several Saab 96s for testing and eventually sold the cars back to Saab with the V4 engines in them. Saab tested the V4s at their Trollhättan test track which stimulated Saab to acquire the V4 engine for their 95, 96, and 97 (Sonett) introduced in August 1966 (1967 production model). The V4 engine eliminated the need to mix oil with fuel for the two-cycle Saab "Shrike" engine and provided better low end torque. Saab dealers offered the first owner a "Lifetime Warranty" for the V4 for US$50.

Applications:

1.2

The 1.2 L (1,183 cc) version features an 80 mm × 58.86 mm (3.150 in × 2.317 in) bore and stroke. Output was 40 hp (29.8 kW) and 80 N⋅m (59 lb⋅ft) or 45 hp (33.6 kW) and 82 N⋅m (60 lb⋅ft).

Applications:

1.3

The 1.3 L (1,288 cc) version had an 84 mm × 58.86 mm (3.307 in × 2.317 in) bore and stroke. Output was 50 hp (37.3 kW) and 95 N⋅m (70 lb⋅ft) or 53 hp (39.5 kW) and 98 N⋅m (72 lb⋅ft).

Applications:

1.5

The 1.5 L (1,498 cc) V4 had a 90 mm × 58.86 mm (3.543 in × 2.317 in) bore and stroke. It produced 55 hp (41 kW) and 107 N⋅m (79 lb⋅ft), 60 hp (44.7 kW) and 114 N⋅m (84 lb⋅ft) or 65 hp (48.5 kW) and 117 N⋅m (86 lb⋅ft) at 2500 rpm.

Applications:

1.7

The 1.7 L (1,699 cc) V4 had a 90 mm × 66.8 mm (3.54 in × 2.63 in) bore and stroke. It produced 65 hp (48.5 kW) and 129 N⋅m (95 lb⋅ft), 70 hp (52.2 kW) and 137 N⋅m (101 lb⋅ft) or 75 hp (56 kW) and 130 N⋅m (96 lb⋅ft).

Applications:
  • 1966-1970 Ford Taunus 12M P6
  • 1966-1970 Ford Taunus 15M P6
  • 1964-1967 Ford Taunus 17M P5
  • 1967-1971 Ford Taunus 17M P7
  • 1965-1972 Ford Transit Mark I
  • 1967-1972 Matra 530
  • 1969-1972 Ford Capri
  • 1972-1975 Ford Consul (German version)
  • 1975-1981 Ford Granada (German version)
  • 1971-1974 Saab 95, Saab 96 and Saab Sonett, low compression version with 55 hp (41 kW) (same as its contemporary 1500 cc 95/96) for USA market

Also, some DKW Munga, a Jeep like vehicle used in the German army were retrofitted with this Ford V4, to replace its standard two-stroke engine.

Since the Saab 96 was used for rallying it was also tuned. In the rally versions it was bored and stroked to 1.8 and 1.9 L (1,784 and 1,933 cc) giving around 150 hp (112 kW) in the naturally aspirated version and 200 hp (149 kW) DIN at 7000 rpm in the Saab 96 RC Turbo version, doing 0 to 100 km/h (62 mph) in five seconds. SAAB also tuned the engine to 240 hp (179 kW).[2][3]

See also

References
  1. Becker, Clauspeter (1971), Logoz, Arthur (ed.), "Fiat 128", Auto-Universum 1971 (in German), Zürich, Switzerland: Verlag Internationale Automobil-Parade AG, XIV: 109
  2. "Bilsport: Okristligt snabb turbo-Saab med 200 frampiskade hästar (advertisement)". saabphotos.com. Archived from the original on 2 March 2009. Retrieved 20 March 2018.
  3. Granlund, Olle (17 October 2010). "Minnesanteckningar från införandet av fyrtaktsmotorn i Saab 95/96 1966" [Notes on the introduction of the four stroke engine in the 1966 Saab 95/96.].
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.