HMS A11

HMS A11 was an A-class submarine built for the Royal Navy in the first decade of the 20th century. After surviving World War I, she was sold for scrap in 1920.

A group of A-class submarines
History
United Kingdom
Name: A11
Builder: Vickers, Sons & Maxim Ltd. Barrow-in-Furness, England
Launched: 8 March 1905
Commissioned: 11 July 1905
Fate: Scrapped, May 1920
General characteristics
Class and type: A-class submarine
Displacement:
  • 190 long tons (193 t) surfaced
  • 206 long tons (209 t) submerged
Length: 105 ft (32.0 m)
Beam: 12 ft 9 in (3.9 m)
Draught: 10 ft 8 in (3.3 m)
Installed power:
Propulsion:
  • 1 × 16-cylinder Wolseley petrol engine
  • 1 × electric motor
Speed:
  • 11 knots (20 km/h; 13 mph) surfaced
  • 6 knots (11 km/h; 6.9 mph) submerged
Range: 500 nautical miles (930 km; 580 mi) at 10 kn (19 km/h; 12 mph) surfaced
Complement: 2 officers and 9 ratings
Armament: 2 × 18-inch (45 cm) torpedo tubes

Design and description

A11 was a member of the first British class of submarines, although slightly larger, faster and more heavily armed than the lead ship, HMS A1. The submarine had a length of 105 feet 1 inch (32.0 m) overall, a beam of 12 feet 9 inches (3.9 m) and a mean draft of 10 feet 8 inches (3.3 m). They displaced 190 long tons (190 t) on the surface and 206 long tons (209 t) submerged. The A-class submarines had a crew of 2 officers and 11 ratings.[1]

For surface running, the boats were powered by a single 16-cylinder 600-brake-horsepower (447 kW) Wolseley petrol engine that drove one propeller shaft. When submerged the propeller was driven by a 150-horsepower (112 kW) electric motor. They could reach 11 knots (20 km/h; 13 mph) on the surface and 6 knots (11 km/h; 6.9 mph) underwater.[1] On the surface, A11 had a range of 500 nautical miles (930 km; 580 mi) at 10 knots (19 km/h; 12 mph); submerged the boat had a range of 30 nautical miles (56 km; 35 mi) at 5 knots (9.3 km/h; 5.8 mph).[2]

The boats were armed with two 18-inch (45 cm) torpedo tubes in the bow. They could carry a pair of reload torpedoes, but generally did not as doing so that they had to compensate for their weight by removing an equal weight of fuel.[3]

Construction and career

A11 was ordered as part of the 1903–04 Naval Programme from Vickers.[4] She was laid down at their shipyard in Barrow-in-Furness in 1903, launched on 8 March 1905 and completed on 11 July 1905.[2]

On 7 September 1910 A11 collided with a barge when leaving Portsmouth Harbour. The barge was sunk, although her two crew were rescued, and A11's bow was slightly damaged.[5]

Notes
  1. Gardiner & Gray, p. 86
  2. Akermann, p. 120
  3. Harrison, Chapter 27
  4. Harrison, Chapter 3
  5. "Naval Matters—Past and Prospective: Portsmouth Dockyard". The Marine Engineer and Naval Architect. Vol. 33. October 1910. p. 98.

References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.