L&YR Class 24
The L&YR Class 24 was a class of short-wheelbase 0-6-0T steam locomotives of the Lancashire and Yorkshire Railway (L&YR). It was designed by Aspinall and introduced in 1897 for shunting duties. Twenty locomotives were built but 6 were withdrawn between 1917 and 1922.
L&YR Class 24 | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. 11535 with wooden dumb buffers at Bank Hall Locomotive Depot in 1948 | |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
|
They were notable for the first design of a locomotive in Britain to use a belpaire firebox and its first use on the L&YR.[3]
Design and construction
They were designed for use in freight yards with sharp curves and steep inclines where more power was needed than that provided by alternative 0-4-0ST Aspinall Pugs.[3]
This was the first time for a new build on the L&YR a belpaire firebox was used.[3] The short-wheelbase design included outside cylinders with Richardson balanced valves on top; these being controlled by a combination of Allan motion and rocking shaft.[4]
Modifcations
The steam reversing gear, helpful for faster shunting operations, was later replaced by a screw which negated this effect. The push and pull regulator handle seemed to have been responsible for a number of minor accidents through lack of fine control was also replaced by a standard type. Those working in the Liverpool docks area had bells fitted beneath the boiler.[5]
Seven of the remaining engines were re-built with Barton Wright type round top boilers around the 1917–1919 period.[6]
Fleet
L&YR no. | LMS no. | BR no. | Withdrawn |
---|---|---|---|
1351 | 1916 or earlier | ||
1352 | 11533 | 1926 | |
1353 | 11534 | 1928 | |
1354 | 1914 | ||
1355 | 11535 | 51535 | 1956 |
1356 | 11536 | 51536 | 1954 |
1357 | 1917 | ||
1358 | 11537 | 51537 | 1961 |
1359 | 11538 | 1932 | |
1360 | 11539 | 1926 | |
493 | 1914 | ||
494 | 11540 | 1931 | |
495 | 11541 | 1926 | |
496 | 11542 | 1931 | |
499 | 11543 | 1932 | |
501 | 11544 | 51544 | 1959 |
503 | 1914 | ||
505 | 11545 | 1936 | |
506 | 11546 | 51546 | 1959 |
507 | 1914 |
Service
The class was allocated mostly to yards in the Liverpool area with Newton Heath and Agecroft depots receiving a number for use in their local larger marshalling yards. One based at Ormskirk was noted for performing on the main line between shunting duties.[2]
Fourteen locomotives passed to the London, Midland and Scottish Railway at the grouping in 1923.[8] After further withdrawals, 5 locomotives passed to British Railways (BR) in 1948 and they were numbered as shown in the table above.[9] All had been withdrawn by 1961.[7] None were preserved.
See also
- LMS Fowler Dock Tank, a similar LMS design which also incorporated outside cylinders regarded as unusual practice for a dock tank
References
- Lane (2010), p. 94, 96.
- Lane (2010), p. 96.
- Lane (2010), p. 94.
- Marshall (1972), p. 142.
- Marshall (1972), p. 142, 145.
- Marshall (1972), p. 142, 258–259.
- Lane (2010), p. 98.
- Casserley & Johnston (1966), p. 115.
- Ian Allan ABC of British Railways Locomotives, 1948 edition, part 3, page 42
Sources and further reading
- Casserley, H. C. & Johnston, Stuart W. (1966). Locomotives at the Grouping 3: London, Midland and Scottish Railway. Shepperton, Surrey: Ian Allan. ISBN 0-7110-0554-0.
- Lane, Barry C. (2010). Lancashire & Yorkshire Railway Locomotives. Pendragon. ISBN 9781899816170.CS1 maint: ref=harv (link)
- Marshall, John (1972). The Lancashire & Yorkshire Railway, volume 3. Newton Abbot: David & Charles. ISBN 0-7153-5320-9.CS1 maint: ref=harv (link)