MAZ-525

MAZ-525 (BelAZ-525 from 1959) was a Soviet heavy truck produced by the Minsk Automobile Plant. Development started in 1949 at the Yaroslavl Automobile Plant Design Bureau as the YaAZ-225. It was planned to install a cab from the YaAZ-200, offset to the left. However, further technical documentation was passed on to MAZ where the design was substantially enhanced.

MAZ-525
Overview
Manufacturer
Also calledBelAZ-525 (1959-1965)
Production1950-1965
Assembly
Body and chassis
Classmining truck
LayoutFR layout
RelatedMAZ-530
Powertrain
Engine38.8L D-12A V12 diesel
Transmission4-speed (5-speed since 1952) hydromechanical with an additional clutch petal
Dimensions
Wheelbase4,780 mm (188 in)
Width3,220 mm (127 in)
Height3,675 mm (145 in)
Curb weight24,380 kg (53,749 lb)
Chronology
SuccessorBelAZ-580

Appearance

The cab appearance changed slightly during production. On the early models the hood was the same width as the cab, in the later editions, it became much narrower. Initially, a guard was installed on the hood sides for safety while the engine was serviced, but was later removed. On the early models a chrome bison hood ornament was placed on the front of the hood while on later models the bison emblem was stamped into the sides. In addition, the early MAZ-525 grille externally resembled that of the MAZ-200.

Variants

In 1952, the MAZ-E-525D was developed to work in tandem with a 15m³ D-189 tractor-scraper. In 1954, the joint efforts of MAZ, Institute of Mining and Kharkov Trolleybus Depot developed a trolley dump truck equipped with two D-202 trolleybus electric motors with total capacity of 172 kW (231 hp). In 1964, NAMI developed a similar truck called the DTU-25. In 1959, the MAZ-525 was used as a basis for the MAZ-541 aircraft tug, of which three were built. Also in 1959, the MAZ-525A tractor was developed as part of a road train with the 45-ton BelAZ-5271 semitrailer, but this did not enter production because the engine was not powerful enough.

Production moved

In 1959, production was transferred to the Belarusian Automobile Plant, where the truck was produced until 1965 under the name BelAZ-525. At the same time the MAZ bison on the side on the hood disappeared and was replaced with the "BELAZ" inscription.

Use

Operation of machines continued until the early 1970s. The MAZ-525 participated in virtually every major Soviet construction site in the 1950s and 1960s, as well as in overseas construction projects (e.g. in the construction of the Aswan Dam in Egypt).

Survivor

The only surviving copy is installed as a monument at the Krasnoyarsk hydroelectric power station.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.