Nacelle

A nacelle (/nəˈsɛl/ nə-SEL) is a housing, separate from the fuselage, that holds engines, fuel, or equipment on an aircraft. In some casesfor instance in the typical "Farman" type "pusher" aircraft, or the World War II-era P-38 Lightningan aircraft's cockpit may also be housed in a nacelle, which essentially fills the function of a conventional fuselage. The covering is typically aerodynamically shaped.[1]

Engines in nacelles on a Boeing 707

Etymology

Like many aviation terms, the word comes from French, in this case from a word for a small boat.[2]

Development

Picture showing the development of the Arado Ar 234, merging the four nacelles into two.

The Nazi-developed Arado Ar 234 was one of the first operational jet aircraft to feature engines mounted in nacelles. This is known as a Podded engine. During its development, the four jet engines were merged from having four distinct nacelles, all of which contained their own landing gear wheel, to two nacelles with two engines each. In recent years, General Electric and NASA have developed nacelles with chevron-shaped trailing edges to reduce the engine noise of commercial aircraft, using an experimental Boeing 777 as a test platform.[3] Boeing then developed this nacelle shape for use with its 787 Dreamliner.[4]

Applications

Twin-engine nacelle on a B-52 Stratofortress

For the most part, multi-engined aircraft will use nacelles for housing the engines, called a Podded engine. There are exceptions to this however: fighter jets (such as the Eurofighter Typhoon) typically have the engines mounted within the fuselage. Also, some engine housings are integrated into the aircraft's wings, such as those of the De Havilland Comet and Flying Wing type aircraft. Engines may be mounted in individual nacelles, or in the case of larger aircraft such as the Boeing B-52 Stratofortress (pictured right) may have two engines mounted in a single nacelle. Nacelles can be made fully or partially detachable for holding expendable resources such as fuel and armaments. Nacelles may be used to house equipment that is too large to fit into the fuselage, for example the Radome on the Boeing E-3 Sentry.

The Boeing E-3 Sentry uses a nacelle to house its large Radome.

Other uses

  • Edward Turner used the term to describe his styling device introduced in 1949 to tidy the area around the headlamp and instrument panel of his Triumph Speed Twin, Thunderbird and Tiger 100 motorcycles. This styling device was much copied within the British industry thereafter, although Czech motorcycle manufacturer Česká Zbrojovka Strakonice was using it beforehand. Indeed, the Royal Enfield Bullet still retains its version, the 'casquette', on its current models. The last Triumphs to sport nacelles were the 1966 models of the 6T Triumph Thunderbird 650, 5TA Triumph Speed Twin 500, and 3TA Triumph Twenty One 350.[5]
  • The generator and gearbox "shell" – with rotator shaft – on a horizontal axis wind turbine (HAWT).[6]
  • A forward projection of a catamaran's bridgedeck designed to soften the impact of seas or make more space inside the cabin.
  • Spacecraft in the Star Trek franchise usually feature warp-drive nacelles.

Design considerations

The primary design issue with any aircraft-mounted nacelle is aerodynamics. Nacelles attached to monoplane wings are almost always mounted underneath, as this is the "high pressure" side of an aircraft wing. This means that the airflow is slower and thus less sensitive to obstructions than the upper "low pressure" side. To keep Form drag as low as possible, nacelles are usually mounted on slender pylons. This can cause issues with routing the necessary conduits required for the equipment mounted within the nacelle to connect to the aircraft through such a narrow space. This is especially a concern with nacelles housing engines, as the fuel lines and control lines for multiple engine functions must all go through the pylon.[1] It is often necessary for nacelles to be asymmetrical, but aircraft designers try to keep asymmetrical elements to a minimum to reduce operator maintenance costs associated with having two sets of parts for either side of the aircraft.[1] Nacelles are often mounted facing slightly downwards of the horizontal plane to compensate for the aircraft's cruising angle of attack.[1]

References

  1. Ilan Kroo, Professor of Aeronautics and Astronautics (April 13, 1999). "Nacelle Design and Sizing". Aircraft Aerodynamics and Design Group at Stanford University. Archived from the original on March 7, 2001. Retrieved April 22, 2011.
  2. "Online Etymology Dictionary". Retrieved 5 December 2013.
  3. "NASA Helps Create a More Silent Night". National Aeronautics and Space Administration. December 13, 2010. Retrieved September 21, 2019.
  4. "Boeing Frontiers Online". National Aeronautics and Space Administration. December 2005. Retrieved September 21, 2019.
  5. p 107, Davies, Ivor It's A Triumph(Haynes Foulis 1980, 1990 edit.) ISBN 0 85429 182 2
  6. American Wind Energy Association (AWEA) video on construction of an individual wind turbine.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.