Queensland C19 class locomotive

The Queensland Railways C19 class locomotive was a class of 4-8-0 steam locomotives operated by the Queensland Railways.

Queensland Railways C19 class
C19 700 displayed at Redbank Railway Museum in 1976
Type and origin Power type Steam Builder North Ipswich Railway Workshops (20) Walkers Limited (6) Build date 1922-1935 Total produced 26
Specifications Configuration: ​  • Whyte 4-8-0 Gauge 1,067 mm (3 ft 6 in) Driver dia. 4 ft 0 in (1.219 m) Fuel type Coal Boiler pressure 160 lbf/in^2 (1,103 kPa) Cylinders 2 outside Cylinder size 19 in × 23 in (483 mm × 584 mm)
Performance figures Tractive effort 23,525 lbf (104.64 kN)
Career Operators Queensland Railways Numbers 695-704, 792-801, 196-201 Preserved 700 Disposition 1 preserved, 25 scrapped

History

The C19 class was designed as a superheated version of the C18 class. Per Queensland Railway's classification system they were designated the C19 class, C representing they had four driving axles, and the 19 the cylinder diameter in inches.

The North Ipswich Railway Workshops built 20 between 1922 and 1928. A further six were built by Walkers Limited in 1935. They worked the heavily graded Main, Southern, North Coast and Western lines.[1][2][3]

Nº 702 entered traffic in December 1923 and was named Centenary as it was the hundredth engine constructed by North Ipswich Railway Workshops. In April 1927, 699 operated a Royal train carrying the Duchess of York and in December 1934, 700 carried the Duke of Gloucester.[2]

A number of modifications were made over the years. The early engines had a large regulator dome and another smaller one for the safety valves similar to the B17 class. Those built from 1926 onwards had a boiler with only one small dome that contained both regulator and safety valves. Earlier engines later received this type as they became due for re-boilering. Both the initial and the subsequent boilers shared a firebox having a long, narrow grate which required considerable effort on the part of the fireman, and rendered them unpopular.[1]

The engines suffered from a number of defects and were prone to cracked frames. As their condition deteriorated and with the introduction of modern engines and later DEL for heavy traffic, the engines were relegated to lesser duties and most were withdrawn during the 1950s. Three engines that had been written off the books were returned to service for short periods in the late 1950s to overcome motive power shortages at that time.

Nº 800 was retained at Maryborough as a stationary steam plant for some years after being written off in April 1956.

Several C19 tenders were kept in a pool at Ipswich after their engines had been withdrawn. These tenders were then fitted temporarily to overhauled C17/B18¼/BB18¼ engines that were ready to return to service but their respective tenders were not yet available.

The last engine in service was Nº 700 at Toowoomba and was written off the books in February 1964.

Preservation

One example has been preserved:

• 700 at the Workshops Rail Museum[3]

References

1. Armstrong, John (1994). Locomotives in the Tropics Volume 2. Brisbane: Australian Railway Historical Society. pp. 66–70. ISBN 9780909937263.
2. Turner, Jim (1997). Australian Steam Locomotives 1896-1958. Kenthurst: Kangaroo Press. p. 112. ISBN 086417778X.
3. Oberg, Leon (2010). Locomotives of Australia 1850s-2010. Dural: Rosenberg Publishing. pp. 176/177. ISBN 9781921719011.

External links