Sinoceratops

Sinoceratops /ˌsnˈsɛrətɒps/ is an extinct genus of ceratopsian dinosaur that lived approximately 73 million years ago during the latter part of the Cretaceous Period in what is now Shandong province in China. It was named in 2010 by Xu Xing et al. for three skulls from Zhucheng, China. The name of its type species Sinoceratops zhuchengensis means "Chinese horned face from Zhucheng", after the location of its discovery.

Sinoceratops
Temporal range:
Late Cretaceous, 73.5 Ma
Reconstructed skeleton
Scientific classification
Kingdom: Animalia
Phylum: Chordata
Clade: Dinosauria
Order: Ornithischia
Family: Ceratopsidae
Subfamily: Centrosaurinae
Genus: Sinoceratops
Xu et al., 2010
Type species
Sinoceratops zhuchengensis
Xu et al., 2010

Sinoceratops was a medium-sized, averagely-built, ground-dwelling, quadrupedal herbivore. It could grow up to an estimated 6 m (19.7 ft) length and 2 metres (6.6 ft) height, and weigh up to 2 tonnes (2.0 long tons; 2.2 short tons). It was the first ceratopsid dinosaur discovered in China, and the only ceratopsid known from Asia. All other centrosaurines, and all chasmosaurines, are known from fossils discovered in North America, except for possibly Turanoceratops. Sinoceratops is also significant because it is one of the largest known centrosaurines, and is much larger than any other known basal members of this group.

Sinoceratops was discovered in the Xingezhuang Formation, which was deposited during the late Cretaceous. It lived alongside leptoceratopsids, saurolophines, and tyrannosaurines. The most common creature in the formation was Shantungosaurus, to which most of the material has been assigned. The animals living alongside Sinoceratops and Shantungosaurus were Zhuchengceratops, Zhuchengtitan, and Zhuchengtyrannus.

Discovery

Illustration of the known portion of the skull

The holotype specimen ZCDM V0010, consisting of a partial skull, including a braincase, was in the summer of 2008 recovered at the Xingezhuang Formation of the Wangshi Group in Shandong, China.[1] The specimen was collected in fluvial sediments that were deposited during the Campanian-Maastrichtian stages of the Cretaceous period, approximately 72–66 million years ago.[2] Two other specimens have been recovered from the same formation. Specimen ZCDM V0011 is a partial skull that consists of the skull roof and most of the braincase, and ZCDM V0012 represents a partial braincase.[1]

The genus name Sinoceratops means "Chinese horned face", and is derived from the word Sino- referring to China from Latin Sina, the country of its discovery, and the Greek words keras (κέρας) meaning "horn", and ops (ωψ) meaning "face".[3] Sinoceratops was described and named by paleontologist Xu Xing and colleagues, in 2010. The type species is Sinoceratops zhuchengensis. The specific name refers to the location of its discovery, the city of Zhucheng which also financed the excavations.[1]

The discovery was significant, because it represented the first ceratopsid known from China, and possibly the only ceratopsid from Asia. The only other possible Asian ceratopsid is Turanoceratops, but recently, its identification as a ceratopsid has been questioned.[1]

Description

Size comparison

Sinoceratops was a larger ceratopsian ornithischian, with an estimated length of about 6 metres (19.7 ft), weight of 2 tonnes (2.0 long tons; 2.2 short tons), and height of about 2 metres (6.6 ft).[4] Thomas R. Holtz Jr. estimated its length at 7 metres (23 ft) and weight at 2.3 tonnes (2.3 long tons; 2.5 short tons), the weight of a rhinoceros.[2] It has a short, hooked horn on its nose (called a nasal horn), no horns above its eyes (brow horns), and a short neck frill with a series of forward-curving hornlets that gave the frill a crown-like appearance. Inside this row of hornlets there is a series of low knobs on the top of the frill, which are not seen in any other horned dinosaur. Sinoceratops is a member of the short-frilled ceratopsids, the Centrosaurinae. Holotype specimen ZCDM V0010 consists of a partial skull with most elements of the skull roof and partial braincase. The skull of Sinoceratops is estimated to be 180 cm (5.9 ft) long making it one of the largest known centrosaurine skulls.[1]

Restoration

Features that differentiate an animal from most or all others are called a diagnosis. Some, but not all, of the features in a diagnosis are also autapomorphies. An autapomorphy is a distinctive anatomical feature that is unique to a given organism.[5] According to Xu (2010), Sinoceratops can be distinguished based on the following diagnostic characteristics: there are at least ten robust, strongly curved hornlike processes along the rear margin of the combined parietals, while at the same time at least four hornlike processes on the combined squamosals are present; there is a large accessory fenestra in front of the antorbital fenestra (differing from all other known centrosaurines); the external margin of the parietals is only weakly undulating (differing from all other known centrosaurines); and the presence of broad-based epoccipitals (differing from all other known centrosaurines).[1]

Classification

Sinoceratops was assigned to the taxon Centrosaurinae, as a basal member by Xu et al. (2010) based on characteristics present in the skull.[1] Sinoceratops bears several characteristics that resemble features in chasmosaurines, blurring the distinction between the Centrosaurinae and Chasmosaurinae. According to Xu e.a. the basal position of Sinoceratops indicates that ceratopids originated in Asia.[1] Sinoceratops however, shares a number of features with advanced centrosaurines such as Centrosaurus and Styracosaurus that are not seen in primitive centrosaurines like Diabloceratops, including a well-developed nose horn and reduced brow horns. The implication might be that this genus represents a lineage that invaded Asia from North America through Beringia.[6]

Close up illustration of the head

The cladogram below represents a phylogenetic analysis by Chiba et al. (2017):[7]

Centrosaurinae

Diabloceratops eatoni

Machairoceratops cronusi

Nasutoceratopsini

Avaceratops lammersi (ANSP 15800)

MOR 692

CMN 8804

Nasutoceratops titusi

Malta new taxon

Xenoceratops foremostensis

Sinoceratops zhuchengensis

Wendiceratops pinhornensis

Albertaceratops nesmoi

Medusaceratops lokii

Eucentrosaura
Centrosaurini

Rubeosaurus ovatus

Styracosaurus albertensis

Coronosaurus brinkmani

Centrosaurus apertus

Spinops sternbergorum

Pachyrhinosaurini

Einiosaurus procurvicornis

Pachyrostra

Achelousaurus horneri

Pachyrhinosaurus canadensis

Pachyrhinosaurus lakustai

Pachyrhinosaurus perotorum

Paleoecology

Sinoceratops skeleton mounted as if confronting Zhuchengtyrannus

Sinoceratops is known from the Xingezhuang Formation of southern China. It is known from skull material. Alongside it, in the formation, lived Shantungosaurus, a very common hadrosaurid to which most of the material has been assigned,[1][8] Zhuchengtyrannus, an Asian tyrannosaurid related to Tarbosaurus,[1] Zhuchengceratops, an Asian leptoceratopsid,[9] and Huaxiaosaurus,[10] a possible older individual of Shantungosaurus.[2][10] Other possible remains have been assigned to Zhuchengosaurus,[9] a probable junior synonym of Shantungosaurus,[2] and material tentatively assigned to Tyrannosaurus.[8]

See also

References

  1. Xu, X., Wang, K., Zhao, X. & Li, D. (2010). "First ceratopsid dinosaur from China and its biogeographical implications". Chinese Science Bulletin. 55 (16): 1631–1635. doi:10.1007/s11434-009-3614-5.CS1 maint: multiple names: authors list (link)
  2. Holtz, T.R. Jr. (2012). Dinosaurs: The Most Complete, Up-to-Date Encyclopedia for Dinosaur Lovers of All Ages. Indiana University Press. p. 47. ISBN 978-0-375-82419-7.
  3. Liddell, Henry George and Robert Scott (1980). A Greek-English Lexicon (Abridged Edition). United Kingdom: Oxford University Press. ISBN 978-0-19-910207-5.
  4. "Saurian Database – Sinoceratops". Gabel Informations Technologie. Retrieved 6 December 2013.
  5. Futuyma, D.J. (2013). Evolutionary Biology (Third ed.). Sunderland: Sinauer Associates Inc. p. 95. ISBN 978-1-60535-115-5.
  6. Glut, D.F. (2012). Dinosaurs, the Encyclopedia, Supplement 7. McFarland & Company, Inc. p. 866. ISBN 978-0-7864-4859-3.
  7. Kentaro Chiba; Michael J. Ryan; Federico Fanti; Mark A. Loewen; David C. Evans (2018). "New material and systematic re-evaluation of Medusaceratops lokii (Dinosauria, Ceratopsidae) from the Judith River Formation (Campanian, Montana)". Journal of Paleontology. in press (2): 272–288. doi:10.1017/jpa.2017.62.
  8. Hu, C.C. (1973). "[A new hadrosaur from the Cretaceous of Chucheng, Shantung]". Acta Geologica Sinica. 2: 179–206.
  9. Zhao, X.; Li, D.; Han, G.; Zhao, H.; Liu, F.; Li, L. & Fang, X. (2007). "Zuchengosaurus maximus from Shandong Province". Acta Geoscientia Sinica. 28 (2): 111–122. doi:10.1007/s10114-005-0808-x.
  10. Zhao X.; Wang K. & Li D. (2011). "Huaxiaosaurus aigahtens". Geological Bulletin of China. 30 (11): 1671–1688.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.