Sound hole
A sound hole is an opening in the body of a stringed musical instrument, usually the upper sound board. Sound holes have different shapes:
- round in flat-top guitars and traditional bowl-back mandolins;
- F-holes in instruments from the violin family, archtop mandolins and in archtop guitars;
- C-holes in violas da gamba;
- rosettes in lutes;
- D-holes in bowed lyras.
Some instruments come in more than one style (mandolins may have F-holes, round or oval holes). A round or oval hole or a rosette is usually a single one, under the strings. C-holes, D-holes and F-holes are usually made in pairs placed symmetrically on both sides of the strings. Most hollowbody and semi-hollow electric guitars also have F-holes.
Though sound holes help acoustic instruments project sound more efficiently, sound does not emanate solely from the sound hole. Sound emanates from the surface area of the sounding boards, with sound holes providing an opening into the resonant chamber formed by the body, letting the sounding boards vibrate more freely, and letting vibrating air inside the instrument travel outside the instrument.
In 2015, researchers at MIT, in collaboration with violin makers at North Bennet Street School, published an analysis that charted the evolution and improvements in effectiveness of violin F-hole design over time.[1][2] One of the conclusions of this paper was that acoustic conductance (air flow) is proportional to the length of the perimeter of the sound hole and not the area. They proved this mathematically, and showed how it drove the evolution of shape of the F-holes in the violin family. The highest air flow in a violin's F-hole are the places at the top and bottom where the points nearly touch the other side. The effect is analogous to putting one's thumb over the end of a hose to accelerate the water coming out. By this measure, the open round hole of a flat-top acoustic guitar is not very effective.
Alternative sound hole designs
Some Ovation stringed instruments feature a particularly unique soundhole architecture with multiple smaller soundholes that, being combined with a composite composite bowl back body, are said to produce a clear and bright sound.
Tacoma Guitars has developed a unique "paisley" soundhole placed on the left side of the upper bout of their "Wing Series" guitars. This is a relatively low-stress area that requires less bracing to support the hole.[3]
A few hollowbody or semi-hollow electric guitars, such as the Fender Telecaster Thinline and the Gibson ES-120T, have one f-hole instead of two, usually on the bass side.
B&G Guitars, a private build guitar company from Tel Aviv, Israel, uses their signature "backwards" sound holes on their guitars.[4]
Holes not positioned on the top of an acoustic guitar are called soundports. They are usually supplementary to a main soundhole, and are located on an instrument's side facing upward in playing position, allowing players to monitor their own sound.[5]
Gallery
F-holes on a Gibson L-5 archtop guitar.
Single F-Hole on a Fender Telecaster Thinline guitar.
Leaf sound hole in an Ovation Adamas guitar.
Many acoustic guitars incorporate rosette patterns around the sound hole.
Maccaferri guitars have D or Oval shaped sound holes.
C-holes on a viol.
References
External links
- Stringworks U - brief explanation of the effects of sound holes, with a closeup diagram of an F-shaped soundhole