Venera 16

Venera 16 (Russian: Венера-16 meaning Venus 16) was a spacecraft sent to Venus by the Soviet Union. This unmanned orbiter was to map the surface of Venus using high resolution imaging systems. The spacecraft was identical to Venera 15 and based on modifications to the earlier Venera space probes.The latest data from the spacecraft were received on June 13, 1985, when it responded to the signal sent from Earth for Vega 1.

Venera 16
Venusian topography by Veneras 15/16
Mission typeVenus orbiter
OperatorSoviet Academy of Sciences
COSPAR ID1983-054A
SATCAT no.14107
Mission duration Overall: 1 year, 1 month
At Venus: 9 months
Spacecraft properties
Spacecraft type4V-2
ManufacturerNPO Lavochkin
Launch mass5,300 kilograms (11,700 lb)
Dry mass4,000 kilograms (8,800 lb)
Start of mission
Launch dateJune 7, 1983, 02:32 (1983-06-07UTC02:32) UTC
RocketProton-K/D-1
Launch siteBaikonur 200/40
End of mission
Last contactJune 13, 1985 (1985-06-14)[1]
Orbital parameters
Reference systemCytherocentric
Semi-major axis45,632.0 kilometres (28,354.4 mi)
Pericytherion altitude7,081 kilometres (4,400 mi)
Apocytherion altitude72,079 kilometres (44,788 mi)
Inclination92.5 degrees
Period24 hours
Venus orbiter
Orbital insertionOctober 11, 1983
Orbits243
 

Mission profile

Venera 16 was launched on June 7, 1983, at 02:32:00 UTC and reached Venus' orbit on October 11, 1983.

The spacecraft was inserted into Venus orbit a day apart from Venera 15, with its orbital plane shifted by an angle of approximately 4° relative to one another probe. This made it possible to reimage an area if necessary. The spacecraft was in a nearly polar orbit with a periapsis ~1000 km, at 62°N latitude, and apoapsis ~65000 km, with an inclination ~90°, the orbital period being ~24 hours.

Together with Venera 15, the spacecraft imaged the area from the north pole down to about 30°N latitude (i.e. approx. 25% of Venus surface) over the 8 months of mapping operations.

Spacecraft structure

The Venera 15 and 16 spacecraft were identical and were based on modifications to the orbiter portions of the Venera 9 and Venera 14 probes. Each spacecraft consisted of a 5 metres (16 ft) long cylinder with a 0.6 m (2.0 ft) diameter, 1.4 m (4.6 ft) tall parabolic dish antenna for the synthetic aperture radar (SAR) at one end. A 1-meter diameter parabolic dish antenna for the radio altimeter was also located at this end. The electrical axis of the radio altimeter antenna was lined up with the axis of the cylinder. The electrical axis of the SAR deviated from the spacecraft axis by 10 degrees. During imaging, the radio altimeter would be lined up with the center of the planet (local vertical) and the SAR would be looking off to the side at 10 degrees. A bulge at the opposite end of the cylinder held fuel tanks and propulsion units. Two square solar arrays extended like wings from the sides of the cylinder. A 2.6 m (8.5 ft) radio dish antenna for communications was also attached to the side of the cylinder. The spacecraft each weighed 4,000 kg (8,800 lb).

Both Venera 15 and 16 were equipped with a Synthetic Aperture Radar (SAR). A radar was necessary in this mission because nothing else would be able to penetrate the dense clouds of Venus. The probes were equipped with on board computers that saved the images until the entire image was complete.

List of spacecraft instruments and experiments:

To get to Venus, Venera 16 was placed in a heliocentric orbit with perihelion of 0.71 AU, apohelion of 1.01 AU, eccentricity of 0.17, orbital inclination of 2.3 degrees and orbital period of 293 days.

See also

References
  1. Siddiqi, Asif A. (2018). Beyond Earth: A Chronicle of Deep Space Exploration, 1958–2016 (PDF). The NASA history series (second ed.). Washington, DC: NASA History Program Office. p. 160. ISBN 9781626830424. LCCN 2017059404. SP2018-4041.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.