Württemberg K

The Württemberg Class K steam locomotives of the Royal Württemberg State Railways (Königlich Württembergische Staats-Eisenbahnen) were the only twelve-coupled locomotives built for a German railway company.

Württemberg K class
DRG Class 59
ÖBB 659
Number(s)DRG 59 001–044
ManufacturerEsslingen
Year(s) of manufacture1917–1919; 1923–1924
Retired1953
Axle arrangement1′F h4v
Track gauge1,435 mm (4 ft 8 12 in)
Length over buffers20,200 mm (66 ft 3 14 in)
Service weight108.0 tonnes (106.3 long tons; 119.0 short tons)
Adhesive weight94.6 tonnes (93.1 long tons; 104.3 short tons)
Axle load16.0 tonnes (15.7 long tons; 17.6 short tons)
Indicated Power1,920 PS (1,410 kW; 1,890 hp)
Driving wheel diameter1,350 mm (4 ft 5 18 in)
Leading wheel diameter943 mm (3 ft 1 18 in)
LP cylinder bore750 mm (29 12 in)
HP cylinder bore500 mm (19 1116 in)
Piston stroke650 mm (25 916 in)
Boiler Overpressure15 kg/cm2 (1.47 MPa; 213 psi)
Grate area4.20 m2 (45.2 sq ft)
Superheater area80.00 m2 (861.1 sq ft)
Evaporative heating area232.00 m2 (2,497.2 sq ft)
Tenderwü 2'2' T 20
pr 2'2' T 21.5
pr 2'2' T 31.5
Water capacity20.0 m3 (4,400 imp gal; 5,300 US gal) or 21.5 m3 (4,700 imp gal; 5,700 US gal) or 31.5 m3 (6,900 imp gal; 8,300 US gal)
BrakesCompressed-air brake

History

The 44 engines of this class built by the Maschinenfabrik Esslingen between 1917 and 1924 were intended for work on the Geislingen ramp (Geislinger Steige) and the Baden Black Forest line. As a result of good experiences in Austria and the fact that there was a maximum axle load of only 16 tonnes on those routes, it was decided to produce a twelve-coupled locomotive. The first and last coupled axles were given side-play (Gölsdorf system), the wheel flanges of the two centre axles were reduced by about 15 mm.

The locomotives proved to be a successful design that was very reliable and powerful. In operations on the hilly routes it was very thrifty, however it was not so economical on the flat. The Deutsche Reichsbahn, that had taken over all the locomotives as DRG Class 59, raised the permissible axle load on the important main lines, so that the performance of the Class K could finally be augmented by ten-coupled engines. As a result, no further batches were ordered.

Move to Austria

After the routes of the Geislinger Steige had been electrified, the engines were no longer required and were given away to Austria, where they were used on the Semmering railway. From there several units went to Yugoslavia and Hungary during the course of the Second World War. The vehicles that remained with, or were returned to, the Deutsche Bundesbahn continued in service until 1953.

Of the 30 examples that stayed in Austria after the Second World War, the majority were sold, two units went to the Soviet Union, six to the Hungarian Railways (MAV). The remaining four engines retained their serial numbers but were grouped into ÖBB Class 659, namely the 659.06, 23, 29 and 41. All locomotives of this class were retired by 1957.

Tenders

The vehicles were coupled with Württemberg and Prussian tenders of classes wü 2'2' T 20, pr 2'2' T 21.5 and pr 2'2' T 31.5.

See also

Literature

  • Giesl-Gieslingen, Adolph (1995). Lokomotiv-Athleten, Geschichte, Leistung und Kurvenlauf der Sechs- und Siebenkuppler (in German). Wien: Verlag Slezak. ISBN 3-85416-171-9.
  • Röder, Rudolf (2007). Die Baureihe 59.0, Württembergs Güterzuggigant und seine Vorgänger (in German). Freiburg: EK-Verlag. ISBN 978-3-88255-159-4.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.