WACO Primary Glider

The WACO primary glider or simply WACO glider, was an early product of the Waco Aircraft Company. The low cost glider was intended to be flown from low hills or towed by a vehicle.

WACO Primary Glider
A WACO glider replica on display
Role Glider
National origin United States of America
Manufacturer Waco Aircraft Company
Number built 300

Design and development

The WACO glider was marketed as a low-cost training aircraft for individuals or glider clubs. About 300 were produced between 1930 and 1931. Replicas have been made using both steel tube or wood frames. Plans are still available for homebuilt construction.[1]

The glider was designed to fly at low airspeeds. It could maintain flight at 20 mph (32 km/h) with a 15 to 1 glide ratio. The fuselage is made of welded steel tubing. The wings use spruce spars, are wire supported and fabric covered. A releasable tow hook was mounted on the front.[2]

Aircraft on display

Experimental Aircraft Association founder Paul Poberezny first learned to fly in a rebuilt WACO Primary glider. In 2002 a replica was built and flown by Poberezny in 2003. It is now on display at the EAA AirVenture Museum in Oshkosh, Wisconsin.[3]

An original WACO primary glider is in the collection of the National Air and Space Museum.[4]

Specifications (WACO primary glider)

Data from Popular Science

General characteristics

  • Capacity: 1
  • Length: 21 ft (6.4 m)
  • Wingspan: 36 ft (11 m)
  • Height: 10 ft (3.0 m)
  • Wing area: 157 sq ft (14.6 m2)
  • Empty weight: 175 lb (79 kg)

Performance

  • Maximum speed: 56 kn (65 mph, 105 km/h)
  • Stall speed: 17 kn (20 mph, 32 km/h)

References
  1. "Primary glider plans". Retrieved 18 August 2011.
  2. Popular Science. July 1930. Missing or empty |title= (help)
  3. "WACO primary Glider". Retrieved 18 August 2011.
  4. "WACO primary glider". Retrieved 18 August 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.