Mark 27 torpedo
The Mark 27 torpedo was the first of the United States Navy 19-inch (48-cm) submarine-launched torpedoes.[2] This electrically-propelled torpedo was 125 inches (3.175 m) long and weighed 1174 pounds (534 kg).[2] The torpedo employed a passive acoustic guidance system and was intended for both submarine and surface targets.[2] Nicknamed "Cutie" [3] by submarine crews, the Mark 27 entered service in 1943 as a defensive weapon.[4] The torpedo was classified as obsolete in the 1960s.[2]
Mark 27 torpedo | |
---|---|
Type | Acoustic torpedo[1] |
Place of origin | United States |
Service history | |
In service | 1943-1946[1] |
Used by | United States Navy |
Wars | World War II |
Production history | |
Designer | Bell Telephone Laboratories |
Designed | 1943[1] |
Manufacturer | Western Electric |
No. built | 1000[1] |
Variants | Mark 27 Mod 4 |
Specifications | |
Mass | 720 pounds[1] |
Length | 90 inches[1] |
Diameter | 19 inches (21-inch guide rails)[1] |
Effective firing range | 5000 yards (approx. 12 minutes search duration)[1] |
Warhead | Mk 27 Mod 0[1] |
Detonation mechanism | Mk 11 Mod 2 contact exploder |
Engine | Electric[1] |
Maximum speed | 12 knots[1] |
Guidance system | Gyroscope[1] |
Launch platform | Submarines[1] |
The Mark 27 was essentially a Mark 24 mine which had been modified for submarine launching in a 21-inch submerged torpedo tube by the addition of 1" wooden guide studs mounted on the torpedo's outer shell.[1][5]
Modifications and improvements
Mark 27 Mod 4 torpedo | |
---|---|
Type | Acoustic torpedo[1] |
Place of origin | United States |
Service history | |
In service | 1946-1960 |
Used by | United States Navy |
Production history | |
Designer | Ordnance Research Laboratory, Pennsylvania State University |
Designed | 1946[1] |
Manufacturer | Avco[1] Naval Ordnance Station Forest Park |
Produced | 1946-1954[1] |
No. built | 3000[1] |
Specifications | |
Mass | 1175 pounds[1] |
Length | 125.75 inches[1] |
Diameter | 19 inches (with 21-inch guide rails)[1] |
Effective firing range | 6200 yards (12 minutes search duration)[1] |
Warhead | Mk 27 Mod 2, HBX[1] |
Warhead weight | 128 pounds[1] |
Detonation mechanism | Mk 11 Mod 2 contact exploder |
Engine | Electric[1] |
Maximum speed | 15.9 knots[1] |
Guidance system | Gyroscope[1] |
Launch platform | Submarines[1] |
The Mark 27 Mod 4 torpedo was designed by the Ordnance Research Laboratory of Pennsylvania State University in 1946 as an improved version of the Mark 27 torpedo.[1]
Fully compatible with electrical setting fire control systems through the use of the standard 65-pin umbilical cable, this weapon was in service on submarines for about ten years. It was withdrawn from service use in 1960 with the introduction of the Mark 37 torpedo.
See also
Notes
- Jolie, E.W. (15 September 1978). "A Brief History of US Navy Torpedo Development: Torpedo Mk 27 Mod 0". Retrieved 19 June 2013.
- Kurak, September 1966, p.145
- http://www.maritime.org/wish-mk27.htm
- Jones, Edward Monroe; Roderick, Shawn S. (2014-11-19). Submarine Torpedo Tactics: An American History. McFarland. pp. 111, 113. ISBN 9781476617589.
- US Navy torpedo history, part 2
References
- Kurak, Steve (September 1966). "The U. S. Navy's Torpedo Inventory". United States Naval Institute Proceedings. Cite journal requires
|journal=
(help)