Train

A train is a form of rail transport consisting of a series of connected vehicles that generally run along a railroad (or railway) track to transport passengers or cargo (also known as "freight" or "goods"). The word "train" comes from the Old French trahiner, derived from the Latin trahere meaning "to pull" or "to draw".[1]

ChS4T locomotive with passenger carriages in Voronezh Oblast, Russia

Union Pacific 844 carrying freight in Nevada, United States

Map of world railway network (interactive map)

Motive power for a train is provided by a separate locomotive or individual motors in a self-propelled multiple unit. The term "engine" is often used as an alternative to locomotive. Although historically steam propulsion dominated, the most common types of locomotive are diesel and electric, the latter supplied by overhead wires or additional rails. Trains can also be hauled by horses, pulled by engine or water-driven cable or wire winch, run downhill using gravity, or powered by pneumatics, gas turbines or electric batteries.

The track usually consists of two running rails with a fixed spacing, which may be supplemented by additional rails such as electric conducting rails ("third rail") and rack rails. Monorails and maglev guideways are also occasionally used.[2]

Passenger trains include passenger-carrying vehicles and can often be very long and fast. High-speed rail systems began expanding rapidly in the late 20th century, and this remains a major subject of further development. The term "light rail" is sometimes used to refer to a modern tram system, but it may also mean an intermediate form between a tram and a train, similar to a heavy rail rapid transit system.

Freight (goods) trains use freight cars (or wagons/trucks) to transport goods or materials (cargo). It is possible to carry passengers and freight in the same train using a mixed consist.

Rail cars and machinery that are used for the maintenance and repair of tracks, are termed "maintenance of way" equipment; these may be assembled into maintenance of way trains. Similarly, dedicated trains may be used to provide support services to stations along a train line, such as garbage or revenue collection.

Types

Arrival of the Normandy Train, Gare Saint-Lazare, by Claude Monet, 1877, Art Institute of Chicago

There are various types of trains that are designed for particular purposes. A train can consist of a combination of one or more locomotives and attached railroad cars, or a self-propelled multiple unit, or occasionally a single or articulated powered coach called a railcar. Special kinds of train running on corresponding purpose-built "railways" are monorails, high-speed railways, maglev, atmospheric railways, rubber-tired underground, funicular and cog railways.

A passenger train consists of one or more locomotives and (usually) several coaches. Alternatively, a train may consist entirely of passenger-carrying coaches, some or all of which are powered; this is known as a "multiple unit". In many parts of the world, particularly the Far East and Europe, high-speed rail is used extensively for passenger travel. Freight trains consist of cars, wagons or trucks rather than carriages, though some parcel and mail trains (especially Travelling Post Offices) appear outwardly to be more like passenger trains. Trains can also have mixed consist, with both passenger accommodation and freight vehicles. These mixed trains are most likely to be used for services that run infrequently, where the provision of separate passenger and freight trains would not be cost-effective, but the disparate needs of passengers and freight means that this is avoided where possible. Special trains are also used for track maintenance; in some places, this is called "maintenance of way".

In the United Kingdom, a train hauled using two locomotives is known as a "double-headed" train. In Canada and the United States, it is quite common for a long freight train to be headed by three or more locomotives. A train with a locomotive attached at both ends is described as "top and tailed", this practice typically being used when there are no reversing facilities available. Where a second locomotive is attached temporarily to assist a train when ascending steep banks or gradients (or to provide braking power for a descent), this is referred to as "banking" in the UK. Many loaded trains in the US are assembled using one or more locomotives in the middle or at the rear of the train, which are then operated remotely from the lead cab. This is referred to as "DP" or "Distributed Power."

Terminology

The railway terminology that is used to describe a train varies between countries.

United Kingdom

In the United Kingdom, the interchangeable terms set and unit are used to refer to a group of permanently or semi-permanently coupled vehicles, such as those of a multiple unit. While when referring to a train made up of a variety of vehicles, or of several sets/units, the term formation is used. (Although the UK public and media often forgo formation, for simply train.) The word rake is also used for a group of coaches or wagons.

Section 83(1) of the UK's Railways Act 1993 defines "train" as follows:

a) two or more items of rolling stock coupled together, at least one of which is a locomotive; or

b) a locomotive not coupled to any other rolling stock.

Other countries

The Atchison, Topeka and Santa Fe Railway's 1948 operating rules define a train as: "An engine or more than one engine coupled, with or without cars, displaying markers."[3]

In North America, Australia and other countries, the term consist (/ˈkɒnsɪst/ KON-sist) is used to describe the group of rail vehicles that make up a train. When specifically referring to motive power, the term refers to the group of locomotives powering the train, as does lash-up. The term trainset refers to a group of rolling stock that is permanently or semi-permanently coupled together to form a unified set of equipment (the term is most often applied to passenger train configurations).

Bogies

US-style railroad truck (bogie) with journal bearings

View from under the bogie of a train

A bogie (/ˈboʊɡi/ BOH-ghee) is a wheeled wagon or trolley. In mechanics terms, a bogie is a chassis or framework carrying wheels, attached to a vehicle. It can be fixed in place, as on a cargo truck, mounted on a swivel, as on a railway carriage or locomotive, or sprung as in the suspension of a caterpillar tracked vehicle. Usually, two bogies are fitted to each carriage, wagon or locomotive, one at each end. An alternate configuration, which is often used in articulated vehicles, places the bogies (often Jacobs bogies) under the connection between the carriages or wagons. Most bogies have two axles, as this is the simplest design, but some cars designed for extremely heavy loads have been built with up to five axles per bogie. Heavy-duty cars may have more than two bogies using span bolsters to equalize the load and connect the bogies to the cars. Usually, the train floor is at a level above the bogies, but the floor of the car may be lower between bogies, such as for a double decker train to increase interior space while staying within height restrictions, or in easy-access, stepless-entry, low-floor trains.

Motive power

Swiss Electric locomotive at Brig, Switzerland

The first trains were rope-hauled, gravity powered or pulled by horses, but from the early 19th century almost all trains were powered by steam locomotives. From the 1910s onwards, steam locomotives began to be replaced with diesel and electric locomotives; although these new forms of propulsion were far more complex and expensive than steam power, they were less labor-intensive, and cleaner. At about the same time, self-propelled multiple unit vehicles (both diesel and electric) became much more widely used in passenger service. Dieselisation of locomotives in day-to-day use was completed in most countries by the 1970s. Steam locomotives are still used in heritage railways operated in many countries for the leisure and enthusiast market.

Electric traction offers a lower cost per mile of train operation but at a higher initial cost, which can only be justified on high traffic lines. Even though the cost per mile of construction is much higher, electric traction is more viable during operation because diesel import costs are substantially higher. Electric trains receive their current via overhead lines or through a third rail electric system.

A developing technology is fuel cells, which combine the advantage of not needing an electrical system in place, with the advantage of emissionless operation. However, an impediment is substantial initial cost associated with fuel cell vehicles.[4]

Passenger trains

Interior of a passenger car in a long-distance train in Finland

A passenger train includes passenger-carrying vehicles and can often be very long and fast. It may be a self-powered multiple unit or railcar, or a combination of one or more locomotives and one or more unpowered trailers known as coaches, cars or carriages. Passenger trains travel between stations or depots, where passengers may board and disembark. In most cases, passenger trains operate on a fixed schedule and have superior track occupancy rights over freight trains.

Unlike freight trains, passenger trains must supply head-end power to each coach for such purposes as lighting and heating, etc. This can be drawn directly from the locomotive's prime mover (modified for the purpose), or from a separate diesel generator in the locomotive. A separate generator van may be used for passenger services on remote routes where a head-end-equipped locomotive is not always available.[5][6]

The oversight of a passenger train is the responsibility of the conductor, who is sometimes assisted by other crew members such as service attendants or porters. During the peak in popularity of North American passenger rail travel, long-distance trains carried two conductors: the main train conductor was accompanied by a Pullman conductor, in charge of sleeping car personnel.

Many prestigious passenger train services have been bestowed a special name, some of which have become famous in literature and fiction. In past years, railroaders often referred to passenger trains as the "varnish", alluding to the bygone days of wooden-bodied coaches with their lustrous exterior finishes and fancy livery. "Blocking the varnish" meant that a slow-moving freight train was obstructing a fast passenger train, causing delays.[7]

Some passenger trains, both long-distance and short-distance, may use bi-level (double-decker) cars to carry more passengers per train. Car design and the general safety of passenger trains have dramatically evolved over time, making travel by rail remarkably safe.

Long-distance trains

Long-distance trains travel between many cities or regions of a country, and sometimes cross several countries. They often have a dining car or restaurant car to allow passengers to have a meal during the course of their journey. Trains travelling overnight may also have sleeping cars. Currently much of travel on these distances of over 500 miles (800 km) is done by air in many countries but in others long-distance travel by rail is a popular or the only cheap way to travel long distances.

High-speed rail

The Shinkansen N700 Series Nozomi travels between Tokyo and Osaka in around two and a half hours.[8]

One notable and growing long-distance train category is high-speed rail, which generally runs at speeds above 200 km/h (120 mph) and often operates on dedicated track that is surveyed and prepared to accommodate high speeds. The first successful example of a high-speed passenger rail system was Japan's Shinkansen, colloquially known as the "bullet train", which commenced operation in October 1964.

The fastest wheeled train running on rails is France's TGV (Train à Grande Vitesse, literally "high speed train") which, under test conditions in 2007, achieved a speed of 574.8 km/h (357.2 mph), twice the takeoff speed of a Boeing 727 airliner. The TGV runs at a maximum revenue speed of 300–320 km/h (190–200 mph), as does Germany's ICE (Inter-City Express) and Spain's AVE (Alta Velocidad Española). The highest speed currently attained in scheduled revenue operation is 350 km/h (220 mph) on the Beijing–Tianjin Intercity Rail and Wuhan–Guangzhou High-Speed Railway systems in China.

In most cases, high-speed rail travel is time- and cost-competitive with air travel when distances do not exceed 500 to 600 km (310 to 370 mi), as airport check-in and boarding procedures can add at least two hours to the overall transit time.[9] Also, rail operating costs over these distances may be lower when the amount of jet fuel consumed by an airliner during takeoff and climbout is taken into consideration. Air travel becomes more cost-competitive as the travel distance increases because the fuel accounts for less of the overall operating cost of the airliner.

Some high-speed rail systems employ tilting technology to improve stability in curves. Examples of tilting trains are the Advanced Passenger Train (APT), the Pendolino, the N700 Series Shinkansen, Amtrak's Acela and the Spanish Talgo. Tilting is a dynamic form of superelevation, allowing both low- and high-speed traffic to use the same trackage (though not simultaneously), as well as producing a more comfortable ride for passengers.

Inter-city trains

The Electric Tilt Train, the fastest train in Australia, operates between Brisbane and Rockhampton in Queensland, a distance of 615 km.

"Inter-city" is a general term for any rail service that uses trains with limited stops to provide fast long-distance travel. Inter-city services can be divided into three major groups:

• InterCity: using high-speed trains to connect cities, bypassing all intermediate stations, thus linking major population hubs in the fastest time possible
• Express: calling at some intermediate stations between cities, serving larger urban communities
• Regional: calling at all intermediate stations between cities, serving smaller communities along the route

The distinction between the three types of inter-city rail service may be unclear; trains can run as InterCity services between major cities, then revert to an express (or even regional) train service to reach communities at the furthest points of the journey. This practice allows marginal communities to be served in the most cost-effective way, at the expense of a longer journey time for those wishing to travel to the terminus station.

Regional trains

Regional trains usually connect between towns and cities, serving smaller urban (and some rural) communities en route. These services are provided to meet local traffic demand in less accessible areas.

Higher-speed rail

Higher-speed rail is a special category of trains. The trains for higher-speed rail services can operate at top speeds that are higher than conventional inter-city trains but the speeds are not as high as those in the high-speed rail services. These services are provided after improvements to the conventional rail infrastructure to support trains that can operate safely at higher speeds.

Commuter trains

Mumbai's suburban trains handle 7.24 million commuters daily.[10]

For shorter distances many cities have networks of commuter trains (also known as suburban trains) serving the city and its suburbs. Trains are a very efficient mode of transport to cope with large traffic demand in a metropolis. Compared with road transport, it carries many people with much smaller land area and little air pollution. Commuter rail also travels longer ranges compared to rapid transit systems with comparatively less frequency and may share tracks with other trains.[11]

Some carriages may be laid out to have more standing room than seats, or to facilitate the carrying of prams, cycles or wheelchairs. Some countries have double-decked passenger trains for use in conurbations. Double deck high speed and sleeper trains are becoming more common in mainland Europe.

Various commuter and suburban train operators (e.g. Sydney Trains, NJ Transit, Paris RER) use double-decker trains. Double-decker trains offer increased capacity even when running fewer services.[12]

Sometimes extreme congestion of commuter trains can become a problem. For example, an estimated 3.5 million passengers ride every day on Yamanote Line in Tokyo, Japan, with its 29 stations. For comparison, the New York City Subway carries 5.7 million passengers per day with 472 stations. Special cars have bench seats fold up to provide standing room only during the morning rush hour on this line. In the past this train has included 2 cars with six doors on each side to shorten the time for passengers to get on and off at station.

Passenger trains usually have emergency brake handles (or a "communication cord") that the public can operate, should an emergency occur (like if someone is stuck on the train doors). This causes the train the emergency cord is pulled in, and in some cases, all the trains in the area to stop. Because the emergency brake cord can stop all the trains in the area to stop causing delays, anyone misusing the emergency brake cord will be punished with heavy fines.

Rapid transit

A "tube train" on the London Underground

A metro train on the Helsinki Metro

Large cities often have a rapid transit system, also called "metro", "underground", "subway" or "tube". The trains are electrically powered, usually by third rail, and their railroads are separate from other traffic, usually without level crossings. Usually they run in tunnels in the city center and sometimes on elevated structures in the outer parts of the city. They can accelerate and decelerate faster than heavier, long-distance trains.

The general term "rapid transit" is used for public transport such as commuter trains, metro and light rail. However, services on the New York City Subway have been referred to as "trains", while services on the London Underground are commonly referred to as "tube trains" or "tubes".

Tram

An Alstom Citadis 100 articulated tram in Bytom, Poland

In the UK, the distinction between a tramway and a railway is precise and defined in law. In Canada and the US, such street railways are referred to as trolleys or streetcars. The key physical difference between a railroad and a trolley system is that the latter runs primarily on public streets, whereas trains have a right-of-way separated from the public streets. Often the US-style interurban and modern light rail are confused with a trolley system, as they too may run on the street for short or medium-length sections. In some languages, in particular Dutch, the word tram also refers to interurban and light rail-style networks.

The length of a tram or trolley may be determined by national regulations. Germany has the so-called Bo-Strab standard, restricting the length of a tram to 75 meters, while in the US, vehicle length is normally restricted by local authorities, often allowing only a single type of vehicle to operate on the network.

Light rail

The term "light rail" is sometimes used for a modern tram system, despite light rail lines commonly having a mostly exclusive right-of-way, more similar to that of a heavy-rail line and less like that of a tramway. It may also mean an intermediate form between a tram and a train, similar to a subway, except that it may have level crossings which are then usually protected with crossing gates. In US terminology, these systems are often referred to as "inter-urban" because they connect larger urban areas in the vicinity of a major city to the center of the city. Modern light rail systems often use abandoned heavy rail rights-of-way (e.g. former railway lines) to revitalize deprived areas and redevelopment sites in and around large agglomerations.

Monorail

Tokyo Monorail

Monorails were developed to meet medium-demand traffic in urban transit, and consist of a train running on a single rail, typically elevated. Monorails represent a relatively small part of the overall railway field. Almost all monorail trains use linear induction motors.[13][14]

Maglev

To achieve much faster operation over 500 km/h (310 mph), innovative maglev technology has been researched since the early 20th century. The technology uses magnets to levitate the train above the track, reducing friction and allowing higher speeds. An early prototype was demonstrated in 1913. The first commercial maglev train was an airport shuttle introduced in 1984 at Birmingham Airport in England.

The Shanghai Maglev Train, opened in 2003, is the fastest commercial train service of any kind, operating at speeds of up to 430 km/h (270 mph). Maglev has not yet been used for inter-city mass transit routes.

Railcar

The Bombardier Talent articulated regional railcar

In British and Australian English, a "railcar" is a self-propelled railway vehicle designed to transport passengers. The term is usually used in reference to a train consisting of a single passenger car (carriage, coach) with a driver's cab at one or both ends. Some railways, e.g. the Great Western Railway, used the term "railmotor". If the railcar is able to pull a full train, it is more likely to be called a "motor coach" or a "motor car".[15] The term "railcar" is sometimes also used as an alternative name for the small types of multiple unit that consist of more than one coach.

Other types

A British heritage passenger train hauled by the historic locomotive Flying Scotsman

Named trains

Railway companies often give a name to a train service as a marketing exercise, to attract more passengers and gain recognition for the company. Naming is usually reserved for the most prestigious services, such as high-speed express trains that run between major cities, stopping at few intermediate stations, or for particularly luxurious trains.

The names of special passenger trains have passed into popular culture: the Orient Express has been a setting for films and other works of fiction. The Flying Scotsman, Golden Arrow, and Royal Scot are examples of famous British trains; the Texas Eagle and California Zephyr are particularly well known in the US; and the Red Arrow is a celebrated Russian sleeper train. In India, some of the popular specially-named train services are the Brindavan Express (Chennai–Bengaluru), Deccan Queen (Mumbai CST–Pune), and Flying Ranee (Mumbai Central–Surat).

A less common practice is the naming of freight trains, for the same commercial reasons. In the 1960s, the Condor was an overnight London to Glasgow express goods train, hauled by pairs of Metro-Vick diesel locomotives. In the mid-1960s, British Rail introduced the Freightliner brand, for the new train services carrying containers between dedicated terminals around the rail network. The Rev. W. Awdry also named freight trains, coining the name "Flying Kipper" for the overnight express fish train that appeared in his stories in The Railway Series books.

Airport trains

Airport trains transport people between terminals within an airport complex.

Heritage trains

Heritage trains are operated by volunteers, often railfans, as a tourist attraction. Usually trains are formed from historic vehicles retired from national commercial operation.

Mine trains

Mine trains are operated in large mines and carry both workers and goods.

Overland trains

Overland trains are used to carry cargo over rough terrain.

Freight trains

British electric container freight train

A Union Pacific freight train

An Aurizon freight train in Fremantle, Western Australia

A freight train (or "goods train") uses freight cars or wagons (also known as "trucks" or "goods wagons") to transport goods or materials (cargo) – essentially any train that is not used for carrying passengers. Much of the world's freight is transported by train, and the rail system in the US is used mostly for transporting freight rather than passengers.

Under the right circumstances, transporting freight by train is highly economic, and also more energy efficient than transporting freight by road. Rail freight is most economic when goods are being carried in bulk and over large distances, but it is less suited to short distances and small loads. Bulk aggregate movements of a mere twenty miles (32 km) can be cost effective, even allowing for trans-shipment costs which dominate in many cases; modern practices such as intermodal container freight are aimed at minimizing these costs.

The main disadvantage of rail freight is its lack of flexibility and for this reason, rail has lost much of the freight business to road competition. Many governments are trying to encourage more freight back onto trains because of the benefits that it would bring.

There are many different types of freight train, used for carrying a huge variety of different kinds of freight, with various types of wagon. One of the most common types on modern railways are intermodal (container) trains, where the containers can be lifted on and off the train by cranes and loaded off or onto trucks or ships. In the US, this type of freight train has largely superseded the traditional boxcar (wagon-load) type of freight train, which requires the cargo to be loaded or unloaded manually. In Europe the sliding wall wagon has taken over from the ordinary covered goods wagon.

In some countries "piggy-back" trains or rolling highways are used. In the latter case trucks can drive straight onto the train and drive off again when the end destination is reached. A system like this is used through the Channel Tunnel between England and France, and for the trans-Alpine service between France and Italy (this service uses Modalohr road trailer carriers). "Piggy-back" trains are the fastest growing type of freight train in the US, where they are also known as "trailer on flatcar" or TOFC trains. Piggy-back trains require no special modifications to the vehicles being carried. An alternative type of "intermodal" vehicle, known as a roadrailer, is designed to be physically attached to the train. The original trailers were fitted with two sets of wheels: one set flanged, for the trailer to run connected to other such trailers as a rail vehicle in a train; and one set with tires, for use as the semi-trailer of a road vehicle. More modern trailers have only road wheels and are designed to be carried on specially adapted bogies (trucks) when moving on rails.

There are also many other types of wagon, such as "low loader" wagons or well wagons for transporting road vehicles. There are refrigerator cars for transporting foods such as ice cream. There are simple types of open-topped wagons for transporting minerals and bulk material such as coal, and tankers for transporting liquids and gases. Today, however, most coal and aggregates are moved in hopper wagons that can be filled and discharged rapidly, to enable efficient handling of the materials.

Freight trains are sometimes illegally boarded by passengers who want a free ride, or do not have the money to travel by ordinary means. This is referred to as "freighthopping." A common way of boarding the train illegally is by sneaking into a train yard and stowing away in an unattended boxcar; a more dangerous practice is trying to catch a train "on the fly", that is, while it is moving, leading to occasional fatalities. Railroads treat it as trespassing and may prosecute it as such.

See also

Rail transport

• Armoured train
• Drumhead (sign)
• Headboard (train)
• Heaviest trains
• History of rail transport
• Hydrail
• List of railway companies
• Lists of named passenger trains
• Luxury trains
• Rocket sled
• Unit train

In popular culture

• List of train songs
• Rail transport in fiction
• Rail transport modelling
• Toy train
• Train game
• Train simulation video games (category)
• V scale (model railroading)

Rail accidents

• Lists of rail accidents

References

1. "Definition of train (noun) in Compact OED". AskOxford.com. Oxford University Press. Archived from the original on 26 May 2005. Retrieved 18 March 2008.
2. "Magnetic Levitation Trains". lanl.gov. Los Alamos National Laboratory. Archived from the original on 8 February 2015. Retrieved 17 September 2014. The electrodynamic suspension (EDS) levitates the train by repulsive forces from the induced currents in the conductive guideways.
3. Atchison, Topeka and Santa Fe Railway (1948). Rules: Operating Department. p. 7.
4. Hydro Kevin Kantola (14 August 2006). "I Hear the Hydrogen Train a Comin', It's Rolling Round the Bend – Hydrogen Cars Now". Hydrogen Cars Now. Archived from the original on 2 March 2010.
5. Johnston, Bob (1 May 2006). "Head-end power: Power for the people". trn.trains.com. Archived from the original on 19 February 2015. Retrieved 20 July 2015.
6. "Typical HEP Configurations". nwrail.com. Northwest Rail Electric Inc. Archived from the original on 22 July 2015. Retrieved 20 July 2015.
7. McIlnay, Dennis P. (2010). The Wreck of the Red Arrow: An American Train Tragedy. Hollidaysburg, PA: Seven Oaks Press. (Chapter One: Bennington). ISBN 978-0-97798053-6.
8. "Tokaido-Sanyo Shinkansen Timetable" (PDF). JR Central. Retrieved 2 April 2020.
9. Central Japan Railway (2006). Central Japan Railway Data Book 2006. p. 16.
10. "Overview Of the existing Mumbai Suburban Railway". mrvc.indianrail.gov.in. Mumbai Railway Vikas Corporation. Archived from the original on 20 June 2008. Retrieved 11 December 2008.
11. Sangeeta (24 June 2013). "Difference between Metro and Local Train". www.differencebetween.info. Retrieved 9 February 2018.
12. "Single-decker v double-decker trains: Barry O'Farrell's claim doubtful". ABC Online. 14 April 2014. Archived from the original on 11 April 2018. Retrieved 10 August 2020.
13. "Linear Motor Driven System". Hitachi-Rail.com. Hitachi, Ltd. 2013. Retrieved 23 June 2019.
14. "Monorail". RailSystem.net. 2015. Retrieved 23 June 2019.
15. "Light Railcars and Railbuses – Feature article". Parry People Movers. Archived from the original on 6 January 2009. Retrieved 9 June 2008.

Further reading

• Glancey, Jonathan (2005). The Train. Carlton Publishing Group. ISBN 978-1-84442-345-3.

External links

• The dictionary definition of train at Wiktionary
• Media related to Trains at Wikimedia Commons
• tips for rail travel travel guide from Wikivoyage