Andesaurus

Andesaurus; Temporal range: Cenomanian; 99.6–97 Ma PreꞒ Ꞓ O S D C P T J K Pg N ↓
Scientific classification
Kingdom:	Animalia
Phylum:	Chordata
Clade:	Dinosauria
Clade:	Saurischia
Suborder:	†Sauropodomorpha
Clade:	†Sauropoda
Clade:	†Eusauropoda
Clade:	†Neosauropoda
Clade:	†Macronaria
Clade:	†Titanosauria
Genus:	†Andesaurus; Calvo & Bonaparte, 1991
Species:	†A. delgadoi
Binomial name
	†Andesaurus delgadoi; Calvo & Bonaparte, 1991

Andesaurus (/ˌændəˈsɔːrəs/ AN-də-SOR-əs; "Andes lizard") is a genus of basal titanosaurian sauropod dinosaur which existed during the middle of the Cretaceous Period in South America. Like most sauropods, it would have had a small head on the end of a long neck and an equally long tail. Andesaurus was a very large animal, as were many others of its relatives, which included the largest animals ever to walk the Earth.

History of discovery

Andesaurus compared to some humans.

In 1991, paleontologists Jorge Orlando Calvo and José Fernando Bonaparte named Andesaurus, which refers to the Andes and also includes the Greek word sauros ("lizard"), because of the proximity of this animal's remains to the Andes. Andesaurus fossils were found by Alejandro Delgado, after whom the single known species (A. delgadoi) is named.

The only known material of Andesaurus is a partial skeleton consisting of a series of four vertebrae from the lower back, as well as 27 tail vertebrae, divided up into two series from separate parts of the tail. The vertebrae from the middle part of its tail had elongated centra.[1] Elements of the pelvis were also discovered, including two ischia and a pubis bone, along with rib fragments and an incomplete humerus and femur.

Description

Total length estimates place Andesaurus at 15 metres (49 ft)[2] to 18 metres (59 ft) long.[3] In 1995, Jan Peczkis created mass estimates of dinosaurs and placed them into order of magnitude categories (each category was then subdivided into thirds); using a mass estimation technique that extrapolates from the circumference of the femur, Andesaurus was listed in the 40 to 70 metric tons (44 to 77 short tons) category.[4] Gregory S. Paul, however, lists Andesaurus as 7 metric tons (7.7 short tons) in weight.[2] In 2020 Molina-Perez and Larramendi estimated a total length of 22 metres (72 ft) and 20 metric tons (22 short tons).[5]

The dorsal vertebrae of Andesaurus bear the typical features of an opisthocoelous centrum and large lateral pleurocoel (pneumatic depression). Unlike related Phuwiangosaurus, there is no ventral keel under any of the vertebrae, and there is a pneumatic feature on the front of the neural arch, the latter being found in most neosauropods. Potentially diagnostic for Andesaurus, there is an additional ridge supporting the lower articulation for the ribs (parapophysis), although poor preservation in other vertebrae means it can only be identified on one bone. The hyposphene-hypantrum articulations of Andesaurus are smaller than more basal sauropods, but less reduced than in Argentinosaurus or Epachthosaurus, where the surface is only articular ridges, and also less reduced than more derived titanosaurs where the articulation is entirely absent. Pre- and post-spinal laminae are present in the vertebrae of Andesaurus, like in other somphospondylans.[6]

Tail vertebrae (caudals) of Andesaurus are slightly procoelous, where the anterior face is concave and the posterior face of convex. This convexity is less prominent than more derived titanosaurs, but is still diagnostic of the clade as a whole. The first caudal has a flat anterior and slightly convex posterior face, different from the subsequent vertebrae similar to in Epachthosaurus. A prominent depression is present on the bottom surface of some anterior caudals, a feature present in diplodocids and multiple titanosaurs. Anterior caudals are shorter proportionally, the bones becoming almost double the proportional length towards the end of the tail. Lateral pleurocoels are present on some vertebrae, as well as small lateral foramina. These foramina are known in some titanosaurs and non-titanosaurs, but their phylogenetic distribution is poorly understood. Like in all titanosauriformes, the neural arch is on the anterior portion of the centrum, and the neural spines are elongate and rectangular. The variation along the caudal series is similar to Epachthosaurus and Malawisaurus.[6]

Classification

Several plesiomorphic (primitive) features characterize Andesaurus as the most basal known member of Titanosauria. In fact, this clade has been defined to contain Andesaurus, Saltasaurus, their most recent common ancestor, and all of its descendants.[7] The most prominent plesiomorphy is the articulations between its tail vertebrae. In most derived titanosaurs, the tail vertebrae articulate with ball-and-socket joints, with the hollowed-out socket end on the front (procoelous caudal vertebrae), while in Andesaurus, both ends of the vertebrae are flat (amphiplatyan caudals), as seen in many non-titanosaurian sauropods. Andesaurus itself is only characterized by a single feature, the tall neural spines on top of its back vertebrae, and needs further study.[8]

Some other basal titanosaurs from Argentina, including Argentinosaurus and Puertasaurus, were also sauropods of enormous size. The most derived group of titanosaurs, the Saltasauridae, included some of the smallest known sauropods, including Saltasaurus itself. Thus it is possible that the largest sizes were attained among the more basal members of the clade.[9]

Palaeoecology

These fossils were discovered in the Candeleros Formation, the oldest formation within the Neuquén Group of Neuquén Province, Argentina. This formation dates to the Cenomanian stage of the Late Cretaceous period, about 99.6 to 97 million years ago.[3] For the most part, the Candeleros represents an ancient braided river system, and besides Andesaurus, also contains fossils of theropods like Buitreraptor and the enormous Giganotosaurus, as well as other sauropods such as the rebbachisaurid Limaysaurus.

References

"Caudal Vertebrae," Tidwell, Carpenter, and Meyer (2001). Page 145.
Paul, G.S., 2010, The Princeton Field Guide to Dinosaurs, Princeton University Press p. 205
Holtz, Thomas R. Jr. (2012) Dinosaurs: The Most Complete, Up-to-Date Encyclopedia for Dinosaur Lovers of All Ages, Winter 2011 Appendix.
Peczkis, Jan (1995). "Implications of body-mass estimates for dinosaurs". Journal of Vertebrate Paleontology. 14 (4): 520–533. doi:10.1080/02724634.1995.10011575. ISSN 0272-4634.
Molina-Perez & Larramendi (2020). Dinosaur Facts and Figures: The Sauropods and Other Sauropodomorphs. New Jersey: Princeton University Press. p. 263.
Mannion, P.D.; Calvo, J.O. (2011). "Anatomy of the basal titanosaur (Dinosauria, Sauropoda) Andesaurus delgadoi from the mid-Cretaceous (Albian–early Cenomanian) Río Limay Formation, Neuquén Province, Argentina: implications for titanosaur systematics". Zoological Journal of the Linnean Society. 153: 1–27. doi:10.1111/j.1096-3642.2011.00699.x.
Salgado, et al. (1997). Wilson and Upchurch (2003).
Upchurch, et al. (2004).
Novas, et al. (2005).

Bibliography

Novas, F.E., Salgado, L., Calvo, J.O., & Agnolin, F. 2005. Giant titanosaur (Dinosauria, Sauropoda) from the Late Cretaceous of Patagonia. Revista del Museum Argentino de Ciencias Naturales 7(1): 37-41.
Salgado, L., Coria, R.A., & Calvo, J.O. 1997. Evolution of titanosaurid Sauropods. I: Phylogenetic analysis based on the postcranial evidence. Ameghiniana. 34: 3-32.
Tidwell, V., Carpenter, K. & Meyer, S. 2001. New Titanosauriform (Sauropoda) from the Poison Strip Member of the Cedar Mountain Formation (Lower Cretaceous), Utah. In: Mesozoic Vertebrate Life. D. H. Tanke & K. Carpenter (eds.). Indiana University Press, Eds. D.H. Tanke & K. Carpenter. Indiana University Press. 139-165.
Upchurch, P., Barrett, P.M, & Dodson, P. 2004. Sauropoda. In: Weishampel, D.B., Dodson, P., & Osmolska, H. (Eds.). The Dinosauria (2nd Edition). Berkeley: University of California Press. Pp. 259–322.